Sold/Expired buggy

[jrhall]

8.1 Liter 496 "Raylar bp 103 billet cam and computer tune"
465 with Hydro clutch
205 fresh rebuild " 32 spline f/r with 1410 yokes and twin sticks"
Wilwood brakes and Master cylinder
Mohawked Housings
47 ltbs with 2 rides
MRW Beadlocks
14 inch 2.0s with 4-4inch Fox airbumps
Corbeaus Seats
2 chamber 3 inch flopwmasters
Psc Double ended ram "rockwell specific"
Aluminum radiator with "Flexalite dual fans"

256 337 1707 Call Ricky
$10,500 or best offer
Located just north of Huntsville Alabama

 

[bigsilly]

Damn JR, could you put up a bigger pic?? I can't hardly make it out from that one

 

[bad80cj]

Nice close up of the fubared rock ring!

 

[jrhall]

pics look fine on my comp ???

 

[jrhall]

Lotta buggy for the price :****:

 

[machen4x4]

i talked with ricky about his rig and since he has had no buyers on it, he has decided to part out rig. alot of high dollar parts here.


256 337 1707 Call Ricky


8.1 Liter 496 "Raylar bp 103 billet cam and computer tune"
465 with Hydro clutch
205 fresh rebuild " 32 spline f/r with 1410 yokes and twin sticks"
Wilwood brakes and Master cylinder
Mohawked Housings
47 ltbs with 2 rides
MRW Beadlocks
14 inch 2.0s with 4-4inch Fox airbumps
Corbeaus Seats
2 chamber 3 inch flopwmasters
Psc Double ended ram "rockwell specific"
Aluminum radiator with "Flexalite dual fans"

 

[Jeep CJ]

I would like to have first dibs on the seats how much and location?

 

[whiskeymakin]

how much for the motor, comp. and harness

 

[machen4x4]

i talked with ricky this afternoon, this is my son-in-law and he is having some health problems. he asked me to handle all of this for him. i will check board daily and try and get everyone a answer soon as possible.
i think he wants $5,000 for motor and wiring harness. you can try and call him but you might not get an answer, if you want to call me that is fine. i will have a breakdown tomorrow on how he wants to sell.
if you guys dont mind pray for my son-in-law ricky
thanks jamie 256-599-2083

 

[RockJeep]

How much for the steering ram? does he have two?
Thanks,
Bobby

 

[JWP]

I am interested in the air bumps.

 

[machen4x4]

ok guys here is the prices on all the parts, 95% of these parts were bought new and only 4 rides on rig.

$2000 on tires
$500 for beadlocks
$4000 for motor,comp,harness
$850 for psc hydro steering
$700 for brakes
$1750 for front and rear rockwells, also have a spare front that is almost complete
$500 for 4 speed 465 all new rebuid, with new spurr cut gears, shift forks
$350 for 205 transfer case 32 spline input and output, machined shift rails, ORD twin stick, 1410 yokes
$900 for turbo 400, 2 rides on trans. ART CARR full reverse valve body, art carr shifter
$750 for 14" fox 2.5 air shoxs
$500 for 2.0 fox bump stops
$125 each for drive shafts
$325 for radiator and flexalight heavy duty fan
$100 for 10 or 12 gallon aluminum fuel cell
$125 for transmission cooler with electric fan

i kept the seats for my build
call me if interested in this stuff 256-599-2083 jamie
i am going to stay with ricky and brittney next week to start taking rig apart
hope to have it all done by saturday
thanks

 

[monkey54]

how much for chasis

 

[DeleriousII]

PM sent

 

[machen4x4]

$750 for chasis

 

[machen4x4]

bump stops and cans have sold
thanks

 

[machen4x4]

np205 transfercase has sold
thanks harold will get this to you next saturday

 

[machen4x4]

fox shocks have..... SOLD....

 

[draggbody]

brand and pics of trans cooler???

 

[machen4x4]

i will try to find out what name brand, will be a few days before i can get pics of it.