smbroady82
Well-Known Member
Located in Huntsville, AL
256-six58-71two2
Stephen
Asking$1600
$1500
I have a set of Toyota axles for sale, I have swapped to tons so these need to go. Bolt these up and go.
One of the rear calipers seems to be hanging up some ( didn't notice it until it was removed from the truck).
Also, the front housing is slightly bent (could very easily be straightened out and trussed)
Front:
TG Dirty Thirty shafts
5.29s (LP)
lock right locker
Fully loaded 6 shooters
TG Super Knuckle Studs (on top side of knuckles, bottoms are stockers)
TG Solid Axle Hubs (Creeper Flange Style)
one of these hubs is not installed yet, it is still NIB
TG Creeper Flanges ( Drive Flanges)
ARP Hub Studs
TG Diff Armor
Set up for leafs, they are still attached (I have no use for them)(brand unknown)
Tie Rod still attached (bent, sleeved, 3/4 heims) ( I ran it for a while like this, run it or scrap it idc)
2in spacers (brand unknown)
Rear:
5.29s
spool
TG Truss
TG Diff Armor
TG Chromo Shafts (One side not installed yet)
Set up for 4 link and air shocks/ C/Os
Nice set of weld on tow points
Disc brakes (95 pathfinder parts)
2in spacers (brand unknown)
These are complete axles.
The spare parts mentioned above will go with the set unless you want to negotiate down, I can sell them separate.
Have more spare parts as well: knuckle rebuilt kit, full set of stock front shafts, (2) extra spindles, tons of misc parts.
I have purchased all of these parts since I have had the truck with the exception of the spool/locker. All parts were bought new with the exception of the rear brake set up. (I have invoices for the majority).
I also have a bunch of other Toyota stuff in another add I will bump up, I would love to make someone a deal on all of it.
Front shafts were over $500
Rear shafts were $275
TG hubs were $250
Fully Loaded 6 shooters $384
Creeper Flanges $165
$1574 for just these parts, not counting anything else
I can bring these to any of the AOP 4cyl races or the Hawk Pride Ride at the end of Feb.
They are dirty, if they do not sell soon I will pressure wash & paint them once the weather allows it.
Located in Huntsville, AL
256-six58-71two2
asking $1500
Thanks
-Stephen
the wheels and tires pictured are not for sale, trust me you don't want the tires anyways
256-six58-71two2
Stephen
Asking
$1500
I have a set of Toyota axles for sale, I have swapped to tons so these need to go. Bolt these up and go.
One of the rear calipers seems to be hanging up some ( didn't notice it until it was removed from the truck).
Also, the front housing is slightly bent (could very easily be straightened out and trussed)
Front:
TG Dirty Thirty shafts
5.29s (LP)
lock right locker
Fully loaded 6 shooters
TG Super Knuckle Studs (on top side of knuckles, bottoms are stockers)
TG Solid Axle Hubs (Creeper Flange Style)
one of these hubs is not installed yet, it is still NIB
TG Creeper Flanges ( Drive Flanges)
ARP Hub Studs
TG Diff Armor
Set up for leafs, they are still attached (I have no use for them)(brand unknown)
Tie Rod still attached (bent, sleeved, 3/4 heims) ( I ran it for a while like this, run it or scrap it idc)
2in spacers (brand unknown)
Rear:
5.29s
spool
TG Truss
TG Diff Armor
TG Chromo Shafts (One side not installed yet)
Set up for 4 link and air shocks/ C/Os
Nice set of weld on tow points
Disc brakes (95 pathfinder parts)
2in spacers (brand unknown)
These are complete axles.
The spare parts mentioned above will go with the set unless you want to negotiate down, I can sell them separate.
Have more spare parts as well: knuckle rebuilt kit, full set of stock front shafts, (2) extra spindles, tons of misc parts.
I have purchased all of these parts since I have had the truck with the exception of the spool/locker. All parts were bought new with the exception of the rear brake set up. (I have invoices for the majority).
I also have a bunch of other Toyota stuff in another add I will bump up, I would love to make someone a deal on all of it.
Front shafts were over $500
Rear shafts were $275
TG hubs were $250
Fully Loaded 6 shooters $384
Creeper Flanges $165
$1574 for just these parts, not counting anything else
I can bring these to any of the AOP 4cyl races or the Hawk Pride Ride at the end of Feb.
They are dirty, if they do not sell soon I will pressure wash & paint them once the weather allows it.
Located in Huntsville, AL
256-six58-71two2
asking $1500
Thanks
-Stephen
the wheels and tires pictured are not for sale, trust me you don't want the tires anyways
figured I would just post that just in case
![IMG_9807[1].JPG](http://attachments.www.hardlinecrawlers.com/xfmg/thumbnail/13/13655-c73abaf668f3355962dda2dd4b6883f0.jpg?1625929949)
