Sold/Expired built Yota parts -- Axles

[Welderd]

going bigger - everthing is OBO, if you don't like the price, make offer

yota axles
2 sets of longfield 30 spline - $540 shipped per full set (one unused, one in axle)
1 longfield birf - needs rebuild but not broken - $125 shipped
4.10 HP cryo'd NOS gear set NEW - gone
4.10 HP cryo'd 3rd member w ARB - 1100obo
4.10 V6 cryo'd 3rd member w ARB - 1000obo
4.10 welded third member - 200obo
Toyoda hydro assist, box, lines, drag link, pitman arm and ram - 300
Marlin hi steer arms with longfields 5th stud and knuckles - 300
All tie rod ends are FJ80 with several extras -10 each for spares?
Several stock yota knuckles -40 each
knuckles on running axle have upgraded studs and 5th stud
spindles, hubs, lockout - make offers
lockouts with longfield hub gears - 150
Front housing set up for 3 link w/panhard - 150
Rear housing for 4 link - 150
IFS rear axle shafts - 50each
rear disc brakes for yota, chevy calipers, sky offroad brackets - 150obo
4 6lug wheel spacers - 60

Rancho 44044 leaf springs - $250 for a brand new PAIR of springs, 150 a used PAIR $450 for every spring I have (4 new, many used)

35" maxxis creepy crawlers (75-80%)
good tread (pics soon)
6 lug chevy mag rim
15" Inner Airlock internal beadlocks
Tires and rims have been used only for rockcrawling only and have been abused. Rims only worth $100
WILL NOT SEPERATE - 1500obo for everything installed

 

[Welderd]

thread on pirate with a few pics of tires

http://www.pirate4x4.com/forum/showthread.php?p=12031806#post12031806

 

[JD]

ill take all the disc brake stuff and 2 tie rod ends...pm me

 

[Welderd]

I still need to pull the axles, but will soon.

I'm gonna try to warranty the tie rod ends so they will be brand new but now some might have a cut boot? I need to look and take pics.

 

[angryfab]

where are u located? i am intrested in the spacers . what is the thickness?

 

[Welderd]

spacers are 1.5"

located in STL

 

[Welderd]

$30 to ship disk brake stuff

 

[Welderd]

ttt

 

[hotshot]

the rear brakes, is it the complete package.....ready to use?

 

[Welderd]

I'd replace the bolts and nylocs that hold the brackets on and you'll need some kind of fitting/brakeline to the calipers.

Other than that you should be good. The pads are worn a little funny from not being fully on the rotors but that's how it's always been and how I guess all these setups are

 

[Welderd]

lots of pics posted to the pirate thread with everything

Lots of misc buggy parts too

 

[Welderd]

cash talks