Bushings, Tube, Crossmember.

[mike d]

Anybody know of a website or a good place up north to purchase poly/bushings something like in the photos below. Im going to build a t-case cross member support and need some of them.

Like the one in this photo in the back by the socket wrench.

Or the ones on each of these corners.

Thanks
Mike

 

[Metalbender]

http://www.pirate4x4.com/forum/showthread.php?t=752630

 

[dove'd85]

you can either buy the tube and bushings seperatly and put them together your self, i no that 4whl parts, and olympic 4x4 sell bushings, or east side custom truck sells them already together i had to purchase a few a couple years ago, if you go there make sure to bring your own lube:5bitch:

 

[CHOP SHOP]

Rear chevy truck spring bushings from ENERGY SUSPENSION have a seamless sleeve inside that fits a 9/16 bolt and they fit nice inside 2 inch SCHEDULE 80 pipe.

you can make 6 of them for about $40:beer:

 

[bigiron]

Energy jeep spring bushing kit fits 1.75 .120 wall dom real nice... and you can build 8 from 1 kit.

 

[mike d]

Thanks for all the quick responses, This is good info. I think im going to just purchase the bushing and make my own.

Mike

 

[Boonie Buster]

I got all mine with bolts from Eastide Custom Trucks in Kirkland. Good guys to talk with too. :awesomework: They have a good selection of tabs too.

 

[bobracing]

http://www.mountainoffroad.com/Catalog/UnivBushAssy/uba1.htm

 

[crazybluerider1]

Poly performance sells them too.
http://www.polyperformance.com/shop/Poly-Performance-Bushing-Kits-p-16605.html