Can someone confirm for my lazy ass...

[skrause]

The spindle nut size on a 2006 Dodge 3500 4x4? Google says 1-11/16"

 

[Lucky Jeff]

Well, that's the size for the 2nd gen trucks.. Different axles but maybe they chose to keep the same size?

 

[JAWS]

The spindle nut size on a 2006 Dodge 3500 4x4? Google says 1-11/16"

I confirm ur very lazy.:haha::haha:

 

[skrause]

Guess I'll be picking up a companion to my 2-1/4" socket soon then. Now who wants to help me beat out two u-joints?

 

[Damnyankee]

Guess I'll be picking up a companion to my 2-1/4" socket soon then. Now who wants to help me beat out two u-joints?

WTF? your not done yet?

 

[wilbilt]

Yes, it is 1 11/16. No, I dont wanna help.

 

[FastEddy]

have fun getting those wheelbearing hubs out of the spindle without a big ****in slide hammer they are always a bitch:hi:

 

[Cole1]

You dont need a slide hammer just get 2 bolts you can thread into the hub and use a crappy socket and have someone start the truck and bump the steering wheel and let the truck push the bearing ass. out. Why make it hard on yourself:awesomework:

 

[skrause]

You dont need a slide hammer just get 2 bolts you can thread into the hub and use a crappy socket and have someone start the truck and bump the steering wheel and let the truck push the bearing ass. out. Why make it hard on yourself:awesomework:

Nice tip, thanks!

 

[FastEddy]

les schwab professional way....:flipoff: be careful you can damage/ruin those hubs easily

 

[blackman]

Ya have fun I did my boss truck and it was a bitch

 

[Flat-Bed_3rd_Gen]

just get an air hammer and do it in truck you dont have to pull the hubs, ill do it for $200, can have it done tm