Sold/Expired chevy 383 stroker

[sr69camaro]

for sale 383 stroker

complete motor from intake to oil pan

heads are only a year old and are procomp 64cc chamber with 202/160 valves and z28 springs

cam is a small base circle from doug herbert and off the top of my head is a 462/468 lift 219/227 duration 110 centerline

comes with stock water pump, alternator and oil pan

has edelbrock aluminum dual plane intake

1.5 ratio roller rockers

chrome valve covers

chrome breather

hei distibutor

motor comes complete ready to run

holds great oil pressure at idle and rev. hold around 25-30 when hot at idle and jumps to 60 when hot

always runs around 160 to 180

can hear run!!

i will be at rbd and chocco christmas ride with it

currently on propane

1100$ without the propane or 1500 with

located in Jacksonville Al

256-310-8797

any questions feel free to ask and i will answer to my best knowledge

thanks

 

[sr69camaro]

If you want pics or video just let me know and I can text them or email them to you, can't get them to load on here

 

[ldudley]

aluminum heads ? whats runner size?
roller tip or full roller rockers? aluminum, stamped or stainless?
what brand crank? int/ext balance?
what balancer?
what rod? 5.7 / 6.0" ? h beam or i beam?

thanks

 

[sr69camaro]

Not sure on the runner size but they are aluminum.
Scat crank
H beam rods 5.7
External balance
Stock balancer
Aluminum roller tip
Also comes with starter and flow tech headers

 

[weezzle]

190 cc intank runner

 

[sr69camaro]

Pics

 

[sr69camaro]

More pics

 

[chrisf5651]

what hp is this suppose to be??????????

 

[sr69camaro]

Never had it on a dyno
I would say somewhere between 325 and 360
Not a beast but pulls strong with great bottom end torque

 

[sr69camaro]

Bump

 

[scottlang]

How long has been since it was built

 

[sr69camaro]

2 1/2 years. Started out in a jeep and swaped into a tube buggy about 5 months ago