Sold/Expired CNC Plasma, Router, Torch Tables
- Thread starter BurnTables
- Start date
Help Support Hardline Crawlers:
BurnTables
CNC Plasma Router Tables
The mobile display rig coming to a event near you!
BurnTables
CNC Plasma Router Tables
Customer made Shot Glass Holder!
BurnTables
CNC Plasma Router Tables
BurnTables
CNC Plasma Router Tables
Make your own Tombstone with concrete engraving from BurnTables.... Yes!!
: sarcasm :
: sarcasm :
BurnTables
CNC Plasma Router Tables
The THC system that is on our tables was completely developed by us here at BurnTables, it is by far the easiest THC system to use, but has all the features that a $5,000 system would and more!
-Adjustable torch height control, pierce height control, pierce delay, anti dive speed, and torch adjustment speed, all adjustable on the fly while cutting!
-All settings are saved, even in the event of power loss!
-Do you only want the system to reference the pierce height, but not use the thc for that occasional odd cut part, yes it can!
-Consumable wearing out but still cutting, but the height has changed because of the wear on the consumable? Don't change it out, get more life out of your consumables, adjust the torch height by the turn of the knob, on the fly while your cutting!
-Are you getting slag build up on the nozzle? Don't stop cutting, raise your pierce height with the turn of the knob, save time make money!
-Cutting the holes in you part at a slower speed but don't want the THC to fight you and drive the torch into the material, With BurnTables antidive features, complete adjustability, and you guessed it.... on the fly! Keeps the torch from diving down in corners also, no matter how slow you go!
-Need cut a part out of a already bent part, with the BurnTables z axis ability to travel 6" and the Automatic Torch Height control, you can cut up to 45 degree bent parts.
-Have a situation that you need to completely turn off the THC, but yet need the functionality of the z axis to raise and lower between cuts, yep got it covered.
Did we mention that this all Standard on ALL of our CNC Tables!
-Adjustable torch height control, pierce height control, pierce delay, anti dive speed, and torch adjustment speed, all adjustable on the fly while cutting!
-All settings are saved, even in the event of power loss!
-Do you only want the system to reference the pierce height, but not use the thc for that occasional odd cut part, yes it can!
-Consumable wearing out but still cutting, but the height has changed because of the wear on the consumable? Don't change it out, get more life out of your consumables, adjust the torch height by the turn of the knob, on the fly while your cutting!
-Are you getting slag build up on the nozzle? Don't stop cutting, raise your pierce height with the turn of the knob, save time make money!
-Cutting the holes in you part at a slower speed but don't want the THC to fight you and drive the torch into the material, With BurnTables antidive features, complete adjustability, and you guessed it.... on the fly! Keeps the torch from diving down in corners also, no matter how slow you go!
-Need cut a part out of a already bent part, with the BurnTables z axis ability to travel 6" and the Automatic Torch Height control, you can cut up to 45 degree bent parts.
-Have a situation that you need to completely turn off the THC, but yet need the functionality of the z axis to raise and lower between cuts, yep got it covered.
Did we mention that this all Standard on ALL of our CNC Tables!
BurnTables
CNC Plasma Router Tables
BurnTables
CNC Plasma Router Tables
BurnTables
CNC Plasma Router Tables
2 1/4" knock wrench cut out of 1'' plate
BurnTables
CNC Plasma Router Tables
BurnTables
CNC Plasma Router Tables
BurnTables
CNC Plasma Router Tables
oxygen acetylene setup
BurnTables
CNC Plasma Router Tables
BurnTables
CNC Plasma Router Tables
BurnTables
CNC Plasma Router Tables
Customer cutting 1" with the Hypertherm Powermax 65.
