Sold/Expired CSC-1 Buggy for Sale or Trade

dangyankii2 · Nov 26, 2015

We do not use this rig and would like to offer it up for sale here.
If it does not sell by xmas we will take it out to AZ and use/sell it there.
This is CSC first chassis ever built. It still holds up well and has been completely gone through.
All new link bars and joints.
BRAND NEW LS-3 style 6.0 with L92 heads. This motor dyno'd with 325+Hp at the rear wheel turning those heavy tires.
The motor could handle a bigger cam but we were shooting for crawling and durability.
It runs a PTC TH350 with Aluminum bellhousing and HP inners. Manual reverse valve body and tranny brake in 1&2. (maybe 5 rides on this tranny)
It has a NP205 twin sticked with ford 31 spline guts.
Rockwell axles, Fox coilovers, PSC 2.5 steering.

This is a great starter buggy. Or all the parts here for a newer style chassis.
Again not set up as a bouncer but will climb any hill they do.
Comes with a modified matching trailer with winch.
Calhoun, GA
Asking 28,500 with trailer.

Will consider trades for titled (no salvage sorry)late model GM 4X4 trucks or RZR 1000(no junk).
Jim

Hotrodpayton · Nov 26, 2015

I really enjoyed this rig, only complaint was lack of power with the ram jet, looks like you fixed that issue! GLWS

dangyankii2 · Nov 27, 2015

Thanks Rodney.
This is our 3rd engine.
One too small,one too big, this one just right.
If yall are at rbd stop by n say hi.
Jim.

dangyankii2 · Dec 12, 2015

Bump.
Make a great Xmas present.

danngto · Feb 22, 2016

Looking to trade
http://www.hardlinecrawlers.com/forums/index.php?topic=50190.0

with 14' trailer 2 years old

900miles and many aftermarket parts looking to sale or trade for Crawler, bouncer, truggy anything that catches my eye
I have 15k just in aftermarket parts in the rzr plus some spare parts
Engine:
Bone stock
Trans:
All gears have been cyro treated
Clutch:
Boon dockers full size snowmobile adjustable primary (no sleeve bearing to go bad which is great) and secondary clutches 3to1 starting ratio, attic cat belt with 2 spare belts, custom clutch cover. Alba racing clutch blower kit with adjustable temp gauge also have another full kit that will go with it that i havent installed cause its really not needed the belt stay cool with just 1 blower.
Very good clutch set up don't have to worry about blowing belts any more or it slipping also takes off much fast than before thanks to the lower starting ratio. The arrtic cat belt is bigger and stronger that oem and only cost $80 vs $200
Suspension:
High clearance satv a-arm with all-ballz ball joints and up-graded hemi's radius arms
Z-brozs high clearance trailing arms
Satv 2-4 lift kit
Assault billet tie rods
Cobra and rhino axles
Steering stops
Wheels and tires:
2" wheel spacers
Sti HD1 14'' bead lock wheels
Sti 32'' Roctains
Body:
Vendetta Motor sports full length rock sliders
PRP vinyl top
30'' light bar
X2 dually lights in rear
Rock lights
4000 viper winch with synthetic line
UTV steel grill
3/8 UHMW full skid plates
Interior:
Custom TWM XXX seats front and rear with 2 stage heating
Dragon fire 3'' 4-point harnesses fount and rear
Harness bar
Dual battery setup
Custom switches, light bar, rear duallys, winch
Stereo:
Sony cd player, 10'' sub in SSV box, X2 6 ½ RF speakers with SSV front pods, X2 8'' RF speakers in rear with custom box , RF 600watt marine amp for highs, MTX 1000Watt for sub
Plus misc spare parts, axles, belts, blower etc.
Im asking 25kobo or Trade
This rzr is not in perfect shape it has rock rash and what not, Its has mostly been used at Smorr, Flat nasty, Disney and so on. It will pretty much go any were you point it all day long
Im located 20miles west on Springfield mo. can call or text 417-379-8381 just about anytime