Dub J
Well-Known Member
- Joined
- Oct 3, 2012
- Messages
- 71
I have some parts for sale. Parting out my rig. I am located in Fairview, TN about 25 minutes outside of Nashville. Text or call at 615-533-5045.
Chevy Dana 60 with 5:13 gears (GEAR ARE STRIPPED FROM LAST RIDE WILL NEED NEW GEARS) welded spiders, with ballistic fab cover, setup for 3 link over TJ coil springs, East Coast Gear 35 spline outer stub shafts/stock inner shafts/Spicer joints, East Coast Gear Supply 35 spline flanges, 1350 yoke, fully rebuilt with all new bearings/seals EVERYWHERE, new brakes, Knuckles have been re-inforced with a kit from DIY4X, knuckles setup for "double shear".
14 bolt rear axle with 5:13 gears, welded spiders, New brakes and completely rebuilt throughout, Sky MFG disk brake bracket/Gm brake kit, Ballistic fab diff cover, setup for 4 link with Blue Torch fab truss kit with pinion guard, 1350 yoke
Both axles $2000.00
39.5 TSLS on 8x6.5 x 15" Allied Beadlocks. One has been Vulcanized. Two have decent tread, and two not as much. $900
PSC Eaton Orbital Valve 7.3 c.i / 120cc with Load reaction/return to center. $400
PSC P-Pump with March brand billet aluminum power steering pump bracket for SBC, V-belt pulley, and KRC fluid resevoir. (Hose and fittings on resevoir not included) $300
Chevy Dana 60 with 5:13 gears (GEAR ARE STRIPPED FROM LAST RIDE WILL NEED NEW GEARS) welded spiders, with ballistic fab cover, setup for 3 link over TJ coil springs, East Coast Gear 35 spline outer stub shafts/stock inner shafts/Spicer joints, East Coast Gear Supply 35 spline flanges, 1350 yoke, fully rebuilt with all new bearings/seals EVERYWHERE, new brakes, Knuckles have been re-inforced with a kit from DIY4X, knuckles setup for "double shear".
14 bolt rear axle with 5:13 gears, welded spiders, New brakes and completely rebuilt throughout, Sky MFG disk brake bracket/Gm brake kit, Ballistic fab diff cover, setup for 4 link with Blue Torch fab truss kit with pinion guard, 1350 yoke
Both axles $2000.00
39.5 TSLS on 8x6.5 x 15" Allied Beadlocks. One has been Vulcanized. Two have decent tread, and two not as much. $900
PSC Eaton Orbital Valve 7.3 c.i / 120cc with Load reaction/return to center. $400
PSC P-Pump with March brand billet aluminum power steering pump bracket for SBC, V-belt pulley, and KRC fluid resevoir. (Hose and fittings on resevoir not included) $300
