• Help Support Hardline Crawlers :

Sold/Expired Dana 60 Front 14 Bolt Rear

FishWagon

Member
Joined
Mar 2, 2011
Messages
18
Dana 60 front, Detroit locker, brand new 5.13 gears pass drop
14B rear, Detroit locker, brand new 5.13 gears

$2000 for both

In Dacula GA
 
They are both full width axles out of a CUCV originally

Front is Dana 60 pass drop with discs.....60.5" from backing plate to backing plate. 1310 Yoke

Rear is 14Bolt with drums. 54.5" from rear of drum to rear of drum. 1410 Yoke

Both with Detroits, both with new 5.13 gears. 14B has new carrier as well.

Leak on drivers side of D60 was from a power steering pump gone bad, not from axle

D60_1.jpg

D60_2.jpg

D60_3.jpg

14B_1.jpg

14B_2.jpg


Total width is approx the same on both with the wheels/tires
scout2.jpg
 
Prefer to keep them together for now.....just to try to get rid of both quick.....but if in a few days they are still available, I'll certainly split them up at that point.

they are off this rig:

http://www.hardlinecrawlers.com/forums/index.php?topic=28924.0

but still on the rig as I'm still hoping someone buys the whole shebang from me as I haven't taken any parts off yet, but wheels MAY be gone today.
 
I have someone trying to arrange shipping now, but will let you know if it falls through.

What kind of rifle?
 
Remington Model 660 6mm. It is very similar to a model 700 it just doesn't have the drop out clip to unload quickly. I have deer hunted with it and shot coyotes and other varmints with it. It is an older gun but hasn't been shot very much. Supposedly it has some collector value but I could care less about that guns are made to be shot.


Sent from my iPhone using Tapatalk
 
Top