onealdodge
Well-Known Member
- Joined
- Mar 3, 2008
- Messages
- 572
sold......Buggy was born on this board hell half of you know it better than me......P I hate to do it but it's just sittin......take a look...
2008 hardline turnkey buggy may trade.
--------------------------------------------------------------------------------
2 seat full tube chassis Jeep liberty buggy!!!! buil up link is attached.....
355TBI /TH350/clocked and built D300 4:1's and 32spline outputs with 1350yokes/ just like atlas frt and rear digs high low.....
D60/Shaved 14B both are welded and have 4.11s
Front is Yukon all the way through with Longfield 300M ujoints
4 link front
4 link rear
Sway bar on rear
10 gal fuel cell
psc single steering ram and pump assy
4 wheel disc brakes
wilwood brake pedal assy. with left right pedals for digs
The links are 2x.250 uppers have Johny Joints all around the lowers have Ballistic fab 3.0s all around
14 radflo N2s shocks all the way around
front has 2" Radflo bumpstops
Corbeau seats w/G force 4pc harness
aluminum radiator/ electric speil fan
9000# winch synthetic line
42" super swamper 95% tread
20" blingin beadlocks
drive flanges
detachable steering wheel
cd/speakers
all guages work
comes with spare tranny with the Ultrabell has a TCI full manual valve body in it and of course the small Tourque Converter which Id guess is about a 3K stall... pretty high for a crawler tranny was fine when I pulled it due to the ear cracked off the back.I have a few spare joints, rear long shaft, I believe short frt shaft....I'll have to chech and see what all I got.
The low down-I bought this buggy with intentions of keeping a lower priced buggy...That is out the window. It will not fit in my toyhauler too wide...I bought it off a local wheeler that had his own fab shop. I will attach the full buildup. As you can tell I have not even steam cleaned under neath just rattle canned the links and axles...**** I missed the drive shafts...
I had Full Throttle Offroad do all maintenance and the repairs and build the body, basket,roof,battery tray, uhmw skids, new lights,trans cooler,rewired buggy completely,clean everything up and skins then I painted them MONSTER energy drink GREEN..It now has no leaks and is ready to ride....
I may trade...I am looking for a smaller lighter rig...suzuki/jeep/toyo/ style rig...TJ's JK's,hotrods. Diesel trucks please NO FORDS!!!!! Looking for a pontoon boat. side by sides hell whatever...
price is a no brainer $15,000 this is alot of buggy for this kind of money.
call me 404 925 8515 Steven
17 page builup http://hardlinecrawlers.com/forums/i...p?topic=1316.0
2008 hardline turnkey buggy may trade.
--------------------------------------------------------------------------------
2 seat full tube chassis Jeep liberty buggy!!!! buil up link is attached.....
355TBI /TH350/clocked and built D300 4:1's and 32spline outputs with 1350yokes/ just like atlas frt and rear digs high low.....
D60/Shaved 14B both are welded and have 4.11s
Front is Yukon all the way through with Longfield 300M ujoints
4 link front
4 link rear
Sway bar on rear
10 gal fuel cell
psc single steering ram and pump assy
4 wheel disc brakes
wilwood brake pedal assy. with left right pedals for digs
The links are 2x.250 uppers have Johny Joints all around the lowers have Ballistic fab 3.0s all around
14 radflo N2s shocks all the way around
front has 2" Radflo bumpstops
Corbeau seats w/G force 4pc harness
aluminum radiator/ electric speil fan
9000# winch synthetic line
42" super swamper 95% tread
20" blingin beadlocks
drive flanges
detachable steering wheel
cd/speakers
all guages work
comes with spare tranny with the Ultrabell has a TCI full manual valve body in it and of course the small Tourque Converter which Id guess is about a 3K stall... pretty high for a crawler tranny was fine when I pulled it due to the ear cracked off the back.I have a few spare joints, rear long shaft, I believe short frt shaft....I'll have to chech and see what all I got.
The low down-I bought this buggy with intentions of keeping a lower priced buggy...That is out the window. It will not fit in my toyhauler too wide...I bought it off a local wheeler that had his own fab shop. I will attach the full buildup. As you can tell I have not even steam cleaned under neath just rattle canned the links and axles...**** I missed the drive shafts...
I had Full Throttle Offroad do all maintenance and the repairs and build the body, basket,roof,battery tray, uhmw skids, new lights,trans cooler,rewired buggy completely,clean everything up and skins then I painted them MONSTER energy drink GREEN..It now has no leaks and is ready to ride....
I may trade...I am looking for a smaller lighter rig...suzuki/jeep/toyo/ style rig...TJ's JK's,hotrods. Diesel trucks please NO FORDS!!!!! Looking for a pontoon boat. side by sides hell whatever...
price is a no brainer $15,000 this is alot of buggy for this kind of money.
call me 404 925 8515 Steven
17 page builup http://hardlinecrawlers.com/forums/i...p?topic=1316.0
