Grommit327
Well-Known Member
'96 toyota tacoma 3.4 V6 with about 180k on it completely stock motor. Been having some issues for awhile and threw a P0171 code which is lean condition. I pulled the MAF and cleaned it. After that it would start and idle roughly at 500rpm and if you applied any throttle it would die. I pulled the ground on the battery to reset the computer and now it will start and rev up to about 1500rpm like a normal cold start and then start sputtering and dies within about 5-10 seconds. So far it hasn't thrown any more codes. Also lots of backfiring if you try to give it throttle.
Thanks for any insight
Joe
Thanks for any insight
Joe