Sold/Expired Feeler: trade tons for built toys

[Mooretoyx4]

Thinking if going back to toys for my new project. Would prefer some built fj60 axles. What I have is a chevy dana60 front with 5:13 gears, eaton locker, freshly rebuilt king pins, and WFO cross over steering arm. Rear is a 14 bolt welded with 5:13 gears and disk brakes. Both axles were sand blasted, cleaned, and lightly painted to keep the rust down. Also have a d60 to toyota yoke for the front.

Would trade the wheels and tires on the right deal as well. Mine are 39.5 x 15 iroks on new 15x10 pro comp rock crawl wheels with total metal innovations weld in beadlocks. They are fully tig welded on. Tires are around 85-90%.











Located in Martinsville Indiana

 

[Mooretoyx4]

Since I have to price them

Axles $1800
Wheels/tires $1500

 

[Mooretoyx4]

Lots of interest but I'm really looking for fj60 axles with 9.5" diff gears.

 

[Stuntman Autoworks]

I have a set of yotas but are just 8". They do have long fields 4.88s welded and set up for 4 link rear with 3 link front. And double ended ram in the front. I also have a set of 39" iroks on 16" steel rims with weld on bead locks.

 

[billstoy]

got a fj40 c clip rear with open diff or lockrite, trussed and link mounts, 1/4" metal diff cover. 9 1/2 r/p, has been in 2 of my Toyota buggies, Won the 4cyl race at AOP with it. Saturday. will do 250 open or 350 with locker. let me know if your interested. Bill

 

[Jbeasley]

I have some 8" Toyota axles front has 30 spline long fields high steer spartan locker 529 gears rear has stock axles 529 gears and locked in rear not sure if it's welded or has a locker!

 

[Jbeasley]

Also have 39.5x13.50x15 iroks grooved just like yours on fake bead locks! Willing to give boot if your interested!

 

[hjpcummins]

Re:

Pm sent

 

[smokincj5]

Pm sent.

 

[simpletoy]

Have a pair of fj40 axles Longfield 30s and Longfield drive flanges welded front and rear front disc conversion also. Front set up for four link rear set up for 3 link I also have 1.5" .250 wall link material and 3/4" economy helms that I would let them go with.