Sold/Expired ford dana 44 cast wedge 3.54

[4bangin2hangin]

Have a cast wedge dana 44 driver drop 3.54 gearing hub to hub has a home made trust was under cherokee 3link used radius style long arms perfect axle to re tube or use as is asking 150.00 obo mcminnville tn text 9312733445 for pic

 

[MoparMan]

Bolt pattern? Manual locking hubs? Open carrier?

 

[Bronco Buster]

Better listing http://nashville.craigslist.org/pts/4955333907.html


I would like to see some pictures of the lower link mounts. I am interested in this for my sons Comanche.

 

[4bangin2hangin]

Bolt pattern is 5x5.5 open carrier manual hubs I chopped links up used for another project

 

[Bronco Buster]

Did you cut the lower link mounts off the axle or did you use the radius arm mounts for the lowers

 

[4bangin2hangin]

Took the radius arm cut in half took some tube made a 3 inch slot down the middle put in center of radius arm welded it up put a bund an hiem on end of tube I had the 3rd link to my cross member dabbed up my own track bar using factory location used factory steering rods

 

[broncomike]

Coming to Hale Mt sat?

 

[4bangin2hangin]

No I'll probably have to work but I live a hr away willing to meet number is 9312733445 shoot me a text

 

[CheapJ7]

I wish we could get it closer to Birmingham I'd be all over this!

 

[4bangin2hangin]

Sale pending tomorow