This is a COMPLETE hub-to-hub Ford HP Kingpin Dana 60 (SRW).
This was pulled from an 80's F-350 so the spring perches are the stock width of an 80's model Ford F-350.
The axle is in good shape. 8x6.5 bolt pattern. 4.10 gears, open-diff. Fluid, ring, pinion, and spider gears all look good and clean. No missing teeth or anything. Rotors look alright. Has manual-locking hubs (not sure what brand). All the wheel studs are present and appear to be in good shape (no lug nuts thought). The pinion yoke appears good, but is missing the U-joint straps (easy to get a hold of at the parts store). the yokes, joints and shafts look good.
Only trades considered would be the axle and cash for a set of 39.5" -43" sticky tires. Don't matter the flavor.
Looking to get $1,200.00 OBO
Located in Louisville, KY
I will be going to Harlan for the fall crawl 18-20 and can bring it with me.
This was pulled from an 80's F-350 so the spring perches are the stock width of an 80's model Ford F-350.
The axle is in good shape. 8x6.5 bolt pattern. 4.10 gears, open-diff. Fluid, ring, pinion, and spider gears all look good and clean. No missing teeth or anything. Rotors look alright. Has manual-locking hubs (not sure what brand). All the wheel studs are present and appear to be in good shape (no lug nuts thought). The pinion yoke appears good, but is missing the U-joint straps (easy to get a hold of at the parts store). the yokes, joints and shafts look good.
Only trades considered would be the axle and cash for a set of 39.5" -43" sticky tires. Don't matter the flavor.
Looking to get $1,200.00 OBO
Located in Louisville, KY
I will be going to Harlan for the fall crawl 18-20 and can bring it with me.
