ToledoDan
Well-Known Member
- Joined
- Sep 8, 2017
- Messages
- 234
Four PSC Weld Plates for 3" Cylinders. They are just like the ones in the link but they are tapped for 1/2" Fine Threads. PSC Switched to Course threads a few years ago, but you can still get the fine threaded ones from them.
Will Ship all four and include the seven bolts (lost one) shown in the pictures. These were mounted on a never ran vehicle I bought a year ago. I cut these off and went with the course thread weld plates instead as shown in the link.
http://www.pscmotorsports.com/flat-weld-plate-for-3-0-cylinder-mounts-1-only.html
Will ship everything for $20 - paypal ok
Seabrook TX 77586
for faster response text 281 four one four - forty five ten
Will Ship all four and include the seven bolts (lost one) shown in the pictures. These were mounted on a never ran vehicle I bought a year ago. I cut these off and went with the course thread weld plates instead as shown in the link.
http://www.pscmotorsports.com/flat-weld-plate-for-3-0-cylinder-mounts-1-only.html
Will ship everything for $20 - paypal ok
Seabrook TX 77586
for faster response text 281 four one four - forty five ten