front locker

[hinton]

first trip out in my rig and the front lockrite is slipping very bad, so what is everyone running with good luck been thinking detroit. its going in a chevy d60

 

[1TONZR2]

pretty much everyone I have talked to about lockrites for 60s have liked them and havent had any issues with them......something not installed right? I dont really know **** about them, my front is welded solid!

 

[hinton]

its installed right i just have run that locker in my old rig for about 3 years and i am not easy on things, but this is the 2nd one i have seen do the same thing mine did just looking at a better locker

 

[jabnasty]

I ran my lockright for about 3 years then it started slipping then wouldnt lock up at all so I just took the welder to it now there are no parts to break.

 

[EOR MFG]

If its new and slipping you have a side gear thrust washer problem. There is a minimum thickness
-Jimmy

 

[CheapJ7]

Chase at ECGS can send you a set of shims for the thrust washers... Look up the specs, the tighter the better...