Sold/Expired GDF's Newly Reworked CJ7 on Tons

Rokcrler · Oct 23, 2011

84 CJ-7 Frame with TJ Tub
HP Dana 60 Front 4.10s with Yukon Chromo Shafts and Drive Flanges
14 bolt rear wth Yukon Chromo Shafts
TPI Engine out of a corvette
HOWE Aluminum Radiator and Electric Fan
Jasper built 700R-4
Trans Cooler with Fan and Thermostat
4 Speed Atlas 10:1 transfer case
4-link Front with Fox 14" Coilovers
4-link Rear with Fox air shocks
Lower links 2"x.25" DOM with 1.25" Heims
Uppers links 1.75"x.25" DOM with 7/8" Heims
New cage made of 1.75" DOM and 1.75" HREW fully tied to frame
New Corbeau Ultra SS seats with 5-point harness
RCI 15 gal fuel cell
9500 warn winch with synthetic rope
32-bolt beadlocks with Coleworx Bling Rings
42" TSL's 95% Tread
:woot:

This is a turn key rig ready to ride :woot:

Build Thread: http://hardlinecrawlers.com/forums/index.php?topic=12654.0

Dark tubes are 1.75" HREW Lighter Tubes are 1.75" DOM

Tub rock

Bunny slope 2

$18000 OBO
Questions call/text
Gared:
256-303-7397

gdf · Oct 23, 2011

Re: 1-Ton Juggy

thanks mo !!!!!!!!!!!!

Draco · Oct 24, 2011

Anyway.....

Rode with this rig Saturday....Simply works.

Gared spent a lot of time, effort, and money making this thing right. (I was there for the rear portion.) A lot of planning went into every detail to make sure it was right before calling it done. No shortcuts were taken. That back half/cage is tied in about 8 different places to the frame. Somebody will get a sho nuff nice, well thought out rig. :****:

In the second video, the high steer arm bolts on the driver side sheared off when the front end came down. He had it home fixing it about 3hrs. later. So nothing will be patched/rigged together.

I hate to see her go, but good luck with the sale! :dblthumb:

gdf · Oct 24, 2011

high steer arms are fixed !!! will be beefed up even more tomorrow :dblthumb:

gdf · Oct 26, 2011

gdf · Oct 27, 2011

TTT !! for reasonable offers!!!

HEAVY CHEVY · Oct 28, 2011

Clarification ON ENGINE. Thats a TPI and not an LT1 correct?

gdf · Oct 28, 2011

Yea that is correct !!! Nice catch will get that fixed! :dblthumb:

Bronco Buster · Oct 28, 2011

My Dad had an 88 Vette that I could have sworn was LT1 and TPI.

TBItoy · Oct 28, 2011

Bronco Buster said:
My Dad had an 88 Vette that I could have sworn was LT1 and TPI.

No such thing as LT1 and TPI... 2 different engines

Bronco Buster · Oct 28, 2011

TBItoy said:
No such thing as LT1 and TPI... 2 different engines

I only looked under the hood a couple of times so I wasn't sure. What kind of induction would it have had?

1fast67 · Oct 28, 2011

I wish thing could have been a 3 seater.. :'(

gdf · Oct 28, 2011

1fast67 said:
I wish thing could have been a 3 seater.. :'(

. Wouldn't take much to make a 3rd seat in the rear! Biggest exspense would be the seat

gdf · Oct 30, 2011

for anybody wondering......there is nothing wrong with this rig.....had a few things come up at once.....and i need the cash.....if it wasnt for that it would not be for sale!

uke:

gdf · Oct 31, 2011

TTT

gdf · Nov 2, 2011

B.DRAKE · Nov 3, 2011

Bump for a sweet rig! Cant believe it's even for sale!

gdf · Nov 6, 2011

)Worked like a charm today at hawkpride !!!! She ain't a 2000hp point and shoot rig........but gets the job done every weekend!!!! Bump for reasonable offers