• Help Support Hardline Crawlers :

I have no idea what I'm doing aka the worst Ultra4 4400 build thread on Earth.

Didn't get a whole lot done with the rainny weather we've had here.

I knocked out the door bars, dropped the cage and welded the top. Made some changes to the front end for more clearance where the drive shaft and upper links will be.

Using an adapter from Offroad Design I got the np205 bolted up to the trans.

Started stripping the front axle and cleaning it up for the new 4 link mounts. Went with Barnes4wd mounts, including their lower flush mount 4 link bracket which I had to modify slightly to fit 2" tubing. All 1.25x1 heims with 3/4 high misalignment spacers. 3/8" tabs.

Once I get a but further a long I'm going to redo the ram mount using a BKOR ram mount plate and build a skid for it.


121513691_172418017758489_3841310132396392417_n.jpg
122809064_407080956961207_7432714956051716106_n.jpg
122429744_142650630920077_6660913400700726170_n.jpg
122829749_1288096154857232_5039905401203188122_n.jpg
122912849_738412390358662_1500745136424799470_n.jpg
122750671_133664098112161_5608317598271567568_n.jpg
122726670_708682749777747_6109587117549587028_n.jpg
122912282_808531970002179_5602763773124944835_n.jpg
122410722_125052265791758_229974711440176348_n.jpg
122532737_350546726276759_5838633065423301244_n.jpg
 
Finally decided on a seat. I went with the RS-PT2 by OMP Racing. They're an Italian motorsports company with a US division.

The reason I went with these is they're FIA rated, super light at 10lbs/ea, removable cushion and cover, hans compatible, affordable, and they were in stock.

I am a big fan of the extra helmet support. That and the fia rating is what pushed me away from Corbreu FX1 Pros.

I will certainly post an update on how these seats hold up for offroad use.
122777438_1727217050760082_5411562290067465734_n.jpg
122546425_386798415837822_3153892262946426528_n.jpg
 
Finally decided on a seat. I went with the RS-PT2 by OMP Racing. They're an Italian motorsports company with a US division.

The reason I went with these is they're FIA rated, super light at 10lbs/ea, removable cushion and cover, hans compatible, affordable, and they were in stock.

I am a big fan of the extra helmet support. That and the fia rating is what pushed me away from Corbreu FX1 Pros.

I will certainly post an update on how these seats hold up for offroad use. View attachment 120991View attachment 120992
That's a cool seat. I know talking with the various classes of Ultra4 racers they've talked about neck fatigue due to the helmets and moving around too much in the seat. So hopefully this seat does the trick.
 
Dressed the dogs up for Halloween

IMG_20201101_111603_909.jpg


The front 4 link came together pretty easy. Right now everything is just tacked together. I flexed it out a little bit to make sure the driveshaft has room but it started to slide around on the jack stands so I'm going to wait til I get the rear tacked together so I don't have to worry about it falling to the ground on me.

Because the engine and "frame" is offset to the passenger side I needed to balance how close the pass side upper got to the lower rail without being so far out it will contact the tire. Right now with the tires turned full lock to pass side its not even close but I do have a 1" spacer inside my ram to cut down the travel from when I had my full Traction long arms to keep it from hitting. It looks like I can pull the spacer out and get the full 10" travel out of the ram and still not hit the tire/links.

IMG_20201104_095741_200.jpg
123478341_1271325933233353_5872001553527337873_n.jpg
IMG_20201108_085557_587.jpg


I attached the winch plate using 6x 1/2" grade 8 bolts so it can be removed when I need to pull the engine.

IMG_20201108_085557_585.jpg


I through together these lower coilover mounts. Right now it's just the m14x2.0 bolt holding them on. I may move them on to the truss and off the inner Cs if I have room after I mount the bump stops. If I keep them where they are ill weld them to the C. I do need to trim the material over the bolt so they don't rub at full droop. There's prob a good 1/2" that I can grind down to 1/4".

20201109_153453.jpg
20201109_153435.jpg

I bent up some 1.75x1.20 for the shock hoops. The driver side hoop is slightly longer to keep the coilover mounts center in relation to the body.
20201110_150745.jpg
IMG_20201110_181618_258.jpg


I tried making my own shock tabs for the hoops but only having an angle grinder they didn't turn our too pretty or matching each other lol. For the few bucks I ordered a couple different size tabs.
 

Attachments

  • IMG_20201101_111603_908.jpg
    IMG_20201101_111603_908.jpg
    69.3 KB · Views: 176
I also decided on the rear setup. I originally wanted to run Ruff Stuffs dual shock trailing arms. After talking to Beerj about it on here I decided running a trailing arm that hangs down isn't in my best interest.

I didn't want to spend what BKOR is asking for their arms so I decided to make my own.

So I ordered a set of TMR's 4" wide antiwobble joints and their archetype trailing arm brackets.

The rest of the setup is coming from Barnes4wd. I ordered their Ford 9" truss, 3/8" tabs, and truss link mounts. All the heims on this build are 1.25x1 with 3/4" high misalignment spacers. This way I don't have to carry a bunch of different size heims and bolts for everything.

The steering hiems are 3/4" bolts but they are 3/4x7/8" heims so I will see if I can fit a 1.25x1 instead so the entire rig will be one size joint and bolt.

1659_620x.jpg
trailing_arm_tab_bracket_bypass_coil_over_ultra_4_1_620x.jpg
1443rev_b_web_620x.jpg
1445_620x.jpg
1443rev_a_web-2_620x.jpg


All this should arrive wed/Thurs this week.
 
I also decided on the rear setup. I originally wanted to run Ruff Stuffs dual shock trailing arms. After talking to Beerj about it on here I decided running a trailing arm that hangs down isn't in my best interest.

I didn't want to spend what BKOR is asking for their arms so I decided to make my own.

So I ordered a set of TMR's 4" wide antiwobble joints and their archetype trailing arm brackets.

The rest of the setup is coming from Barnes4wd. I ordered their Ford 9" truss, 3/8" tabs, and truss link mounts. All the heims on this build are 1.25x1 with 3/4" high misalignment spacers. This way I don't have to carry a bunch of different size heims and bolts for everything.

The steering hiems are 3/4" bolts but they are 3/4x7/8" heims so I will see if I can fit a 1.25x1 instead so the entire rig will be one size joint and bolt.

View attachment 121337View attachment 121338View attachment 121339View attachment 121340View attachment 121341

All this should arrive wed/Thurs this week.
I've not seen the anti wobble bushings before. That's pretty neat.
 
Sorry the delay in updates. I got the rear 4 link setup just waiting ony rear coilovers. Should be here any day. I picked up a set of 2.5x16 Kings off of Dezert-Rangers forum.

I also got the seat mounted, steering wheel/colum setup, and the orbital valve mounted. Which I forgot to grab a picture of once the valve was on.

Using my jack I was able cycle the rear about 19" until I maxed the jack out.


IMG_20201129_113500_489.jpg
IMG_20201129_190818_881.jpg
IMG_20201203_183145_842.jpg
IMG_20201203_183145_845.jpg
IMG_20201203_183145_841.jpg
IMG_20201212_184007_689.jpg
IMG_20201212_184842_141.jpg
IMG_20201212_185557_934.jpg
IMG_20201212_185557_935.jpg
 
Nice. My guess is not much XJ skins going back on the front?

Im planning on cutting the grill/hood down and doing a dove nose. The shock mounts will have to stick out through the hood. I'm not sure yet if I ll modify the stock fenders or if I'll just make my own.

Ive been waiting 2 weeks now for usps to delivery my rear coilovers which has held me up a bit.
 
Im planning on cutting the grill/hood down and doing a dove nose. The shock mounts will have to stick out through the hood. I'm not sure yet if I ll modify the stock fenders or if I'll just make my own.

Ive been waiting 2 weeks now for usps to delivery my rear coilovers which has held me up a bit.
gotcha. In the last pic, it looked like the top of the fairlead would be even with the hood.
 
gotcha. In the last pic, it looked like the top of the fairlead would be even with the hood.
The winch itself shouldn't sit any higher than the alt. If I really needed to I could move the bolt on mount to sit under the lower rail instead of on top but from the looks of it as it is everything should fit with some trimming of the plastic bits on the grill.
 

Latest posts

Top