Sold/Expired Inviscid Motorsports- Rear facing mid engine Ultra 4 race buggy / trail machine

[wbones9]

Inviscid Motorsports Rear Facing, Mid-Engine Ultra 4 buggy.
I am asking $29,500 EDIT- NOW 26,000.
I would also be interested in a partial trade ($10,000 max value) for a crew cab ford pickup/sport trac, trail machine, RZR, boat, truck, etc

The toter is not included for $29,500. The toter will be offered to whoever buys the buggy for an additional $15K.

Located in Michigan, will deliver anywhere in the USA

We are looking to take our motorsports racing in a different direction, so we feel it is time to sell our U4 vehicle. This is not a fire sale. If it doesn't sell, we will continue racing it. However, this is a great buggy to get you started in Ultra4 racing.

Chassis - MotorCity Machines, mid facing rear engine
Engine - Ford 5.8L 351W EFI MAF conversion, aftermarket wiring harness, A9P computer. PSC P-pump. Double fuel system (pumps and filters)
Transmission - Ford C6 Automatic, e4OD first gear ratio (2.7:1), Hughes TC, Broader performance full manual VB, Art Carr shifter. Huge Griffin trans cooler
Transfer Case - Atlas II 3.0:1 ratio
Axles - Housings built by Motorcity Machines, 5.38 gears set by Ironman Offroad
Front – D60 Rear axle differential, flipped upside down with Ford Superduty C's, knuckles and unit bearings. Branik Motorsports 35 spline axle shafts and drive flanges, with CTM U-joints and a spool.
Rear – D60 Superduty front differential flipped upside down, full float 35 spline hubs with Branik Motorsports custom axleshafts, with spool.
Tires – 40" Maxxis Trep stickies (6 total)
Rims - Raceline Monster beadlocks
Driveshafts - Custom built by Joint Clutch and Gear (Bay City and Romulus, MI) using all 1410 joints
Suspension - 16" reservoir coilovers from PAC Racing Springs, 4" bumps from FOA, Coil springs from PAC Racing.


The pictures really tell the story, so here goes.

some of these pictures are from through-out the build process and 2012 races, so there is racing rash on the buggy now as compared to new.

Here is the tube after the KOH roll/spin. I have not replaced the tube.

http://i923.photobucket.com/albums/ad79/BillBridgeRacing/2012%20King%20of%20the%20Hammers/424838_367214476639412_100000525893752_1361149_751313574_n.jpg

Here is a video of the first lap of a TREC race
Lap 1 TREC March 31, 2011 - Inviscid Motorsports on Vimeo

The full build thread is here, with piles and piles of pictures. Some of the parts have changed, but this gives you a good idea of the build.
http://www.pirate4x4.com/forum/general-4x4-discussion/992902-inviscid-motorsports-ultra-4-trec-trail-rig-car-9009-a.html

looking rearward

looking forward

on bumps

coils and skinned

I also have a 1998 Freightliner FL70 that is a legal motorhome that could be included in the sale. It has a CAT 3126 and a spicer 7 speed, air ride, air brakes, tons of storage in the box, I built a bathroom in the box that has hot water (if you have 110V hookup). 75 gal of fresh water, 36 gal of gray holding, 36 gal of black holding.

picstures of the toter

http://i923.photobucket.com/albums/ad79/BillBridgeRacing/Freightliner%20Toter/IMG_8228.jpg
http://i923.photobucket.com/albums/ad79/BillBridgeRacing/Freightliner%20Toter/IMG_8214.jpg

Please PM me any and all offers.

 

[wbones9]

bump. Price can be reduced if I keep things like the tires/rims, GPS, winch, etc...

 

[wbones9]

bump!

 

[ridered3]

Very cool looking setup and impressive build!

Here are your other two pictures of the toter:

 

[wbones9]

engine is pulled and getting some more HP Still for sale

 

[wbones9]

btt

the engine build has halted while I wait to hear back from a couple interested groups. It could be turn-key in under a week.

[size=10pt]PRICE REDUCED TO 26K[/size]

 

[wbones9]

Wishing you were at KOH preunning in the desert this week?