• Help Support Hardline Crawlers :

Sold/Expired Iso Rockwells steers or front and rear. Found some! Thanks hardline!

SHELBS44

Frosty beverages and HL2 FTW
Joined
May 19, 2014
Messages
812
Iso Rockwells. Can be 2 steers or a steer and a straight. Depending on price. Located in Tuscaloosa al. Thanks
 
Re: Iso Rockwells steers or front and rear

Fordcontraption on her usually has some laying around.
 
Re: Iso Rockwells steers or front and rear

Thanks Pholmann. I'll holler at him in abit
 
Re: Iso Rockwells steers or front and rear

It's a Long shot, but I know a man that has two steers with double eneded Rams under his rig that would trade for ford tons.
 
Re: Iso Rockwells steers or front and rear

Thanks for the offer eddyj. I don't have any ford tons. Now if I can't find any might be willing to buy some to trade :****:
 
Re: Iso Rockwells steers or front and rear

I've got a steer & a rear (unmolested)$1200 for the pair. But I'm n Louisville,Ky
 
Re: Iso Rockwells steers or front and rear

if that wasn't 6 1/2 hours from me I would jump all over that. if I cant find anything closer ill keep you in mind
 
Re: Iso Rockwells steers or front and rear

thanks for the offer gottagofast. saw it before you deleted it just didn't have time to respond. Still trying to find a closer set so far no luck.
 
Re: Iso Rockwells steers or front and rear

bump one last time. trying to find something a little closer
 
Re: Iso Rockwells steers or front and rear

^^^^^^ bahahahaha beat me to it
 
Re: Iso Rockwells steers or front and rear

My axle tubes have never twisted in the housing. Just saying.
 
Re: Iso Rockwells steers or front and rear

Eddyj said:
My axle tubes have never twisted in the housing. Just saying.



Truth!! :****: Cmon any takers that's closer to me?
 
Re: Iso Rockwells steers or front and rear

Bump again
 
Re: Iso Rockwells steers or front and rear

I have a steer axle and two rears

-The steer is debraked, but needs the outer steering knuckle on one side, and a 3rd member
- Both rears are complete, minus one pinion flange
- I also have two extra complete third members for parts. They were good, but have been sitting outside

Iuka, MS $1,200 for all
 
Top