JB Conversions 241C SYE

zeke392 · Feb 7, 2018

Anybody used one of these kits before?
http://www.jbconversions.com/products/sye/np241c_j_std_sye.php

onepieceatatime · Feb 7, 2018

I have one on a tcase sitting in my garage. Ran it for 4 years or so with no problems.

Sent from my SM-G930T using Tapatalk

ranger11 · Feb 7, 2018

I used one of the kits on Branhams blazer. But can't remember which one.

Sent from my XT1635-01 using Tapatalk

al1tonyota · Feb 7, 2018

ranger11 · Feb 7, 2018

Looked back at the parts, it was a 233c. What's your question Steve?

Sent from my XT1635-01 using Tapatalk

zeke392 · Feb 7, 2018

ranger11 said:
Looked back at the parts, it was a 233c. What's your question Steve?

Sent from my XT1635-01 using Tapatalk

Need to buy one soon, as best as I can tell this is my only option for the 241C.

al1tonyota · Feb 7, 2018

I've thought about doin this but I'm gun shy from putting close to atlas money in a pos dana 300

nhl_bullitt · Feb 7, 2018

I've ran the 1350 flange on stickies for 1.5 years, so far so good.

onepieceatatime · Feb 7, 2018

Where are you located? I have a 241c with an sye and clocking ring on it up here in Ohio and would like to get it out of my way.

Sent from my SM-G930T using Tapatalk

al1tonyota · Feb 7, 2018

onepieceatatime said:
Where are you located? I have a 241c with an sye and clocking ring on it up here in Ohio and would like to get it out of my way.

Sent from my SM-G930T using Tapatalk

I'm in Tuscaloosa al if your asking me? How much are you wanting for it? Pm if you want!

zeke392 · Feb 7, 2018

onepieceatatime said:
Where are you located? I have a 241c with an sye and clocking ring on it up here in Ohio and would like to get it out of my way.

Sent from my SM-G930T using Tapatalk

I'm just south of Atlanta and interested in your deal. PM me a number and I'll give you a call.

Thank you,

Steve

zeke392 · Feb 7, 2018

al1tonyota said:
I'm in Tuscaloosa al if your asking me? How much are you wanting for it? Pm if you want!

I don't think he's asking you

al1tonyota · Feb 7, 2018

zeke392 said:
I don't think he's asking you

Ha aight then Boss

zukimaster · Feb 7, 2018

Yea big man Adam Lee, keep yo mouth shut down there in Title Town. :flipoff1:

al1tonyota · Feb 7, 2018

zukimaster said:
Yea big man Adam Lee, keep yo mouth shut down there in Title Town.

zeke392 · Feb 7, 2018

al1tonyota said:
Ha aight then Boss

If I don't buy it I'll post up here and it's all yours

HotwheelsYJ · Feb 8, 2018

I did a hack & tap SYE to mine for a 1410 flange mount. It cost me $90 for the 32 spline flange & then a little machine time

Sent from my Pixel using Tapatalk

al1tonyota · Feb 8, 2018

HotwheelsYJ said:
I did a hack & tap SYE to mine for a 1410 flange mount. It cost me $90 for the 32 spline flange & then a little machine time

Sent from my Pixel using Tapatalk

Ahh man that's awesome! Appreciate this! Where did you source the yoke?

zeke392 · Feb 9, 2018

onepieceatatime said:
Where are you located? I have a 241c with an sye and clocking ring on it up here in Ohio and would like to get it out of my way.

Sent from my SM-G930T using Tapatalk

I talked to Zach and I am buying his transfer case from him :woot:

zeke392 · Feb 9, 2018

I read about a couple hack & taps before but not much detail. Being a machinist I am sure I can do all required machine work, can we get a list of parts?