SFAZR2Dave
Drive Pole Mak'a
Jimmy Smith Single Seat Buggy with ATC enclosed trailer option.
Asking 35.5k or make offer
Cash, Wire transfer, CC or Paypal if you pay the fees.
Walk around
6 Liter Iron Block with Massaged Al. Heads, Aftermarket Al. intake, 42lb. injectors, Texas Speed cam & Tune, etc.
Th350 - Built, Man Rev. Valve body with Art Car Shifter
Atlas II 3.8 DSD w/ Tail Housing support.
1350 .250 Wall Drive Shafts - 2pc. Front with M&M Off Road Carrier Bearing.
14 Bolt Front Shaved with ARB, Solid Knuckles & 4 wheel supply Arms & Tie in's.
RCV's Custom Length. Front is Narrowed 7" to match Dually Rear
14 Bolt Rear Shaved with Spool, Trussed w/ pinion support & Disc Brakes
4.56 Gears
Fox 2.0 14" Coilovers - Coils Specs for Corner weights by Ryan @ Accutune
Fox 2.5 Triple Bypass' All tuned by AccuTune Off-Road
2" Fox Air Bumps on the front
TK1 Sway bar on the rear
17" Raceline Monsters w/ Al. Beadlocks
43" Super Swamper SX Sticky's 1/2+ tread
2" 6061 Aluminum Links with 1.25" Chro-mo Heims
15 Gal. Custom Al. Fuel Cell w/ -10 Fittings w/ pre-filter and Walbro Pump
Warn 9.5 RC Winch w/ syn. rope
PSC Full Hydro - Double ended Ram
Corbeau Ultra Seat - Vinyl - w/ PRP 5.3 Harness
ARB on board air compressor.
LED Rock Lights
UHMW Skid Plate
Spare Drive Shafts and Parts can be included.
118" WB
Weighs approx. 3k
Ready to Ride, needs nothing, Very light and plenty of power! Will go up anything you have the balls to point it at.
35,500.00 or 45K I'll add a really nice 24' ATC Enclosed trailer.
Looking for a nice, built Jeep on tons/V8, Stock JK, Nice bigger RV, "Might" trade for a RZR turbo S, CAN AM Defender and some $ your way. Whatcha got?
Offer up, the worst I can say is no, but please be realistic. Thanks.
Willing to travel within reason - I have friends out west and would consider delivering for fuel money.
Located in Winston Salem NC
Asking 35.5k or make offer
Cash, Wire transfer, CC or Paypal if you pay the fees.
Walk around
6 Liter Iron Block with Massaged Al. Heads, Aftermarket Al. intake, 42lb. injectors, Texas Speed cam & Tune, etc.
Th350 - Built, Man Rev. Valve body with Art Car Shifter
Atlas II 3.8 DSD w/ Tail Housing support.
1350 .250 Wall Drive Shafts - 2pc. Front with M&M Off Road Carrier Bearing.
14 Bolt Front Shaved with ARB, Solid Knuckles & 4 wheel supply Arms & Tie in's.
RCV's Custom Length. Front is Narrowed 7" to match Dually Rear
14 Bolt Rear Shaved with Spool, Trussed w/ pinion support & Disc Brakes
4.56 Gears
Fox 2.0 14" Coilovers - Coils Specs for Corner weights by Ryan @ Accutune
Fox 2.5 Triple Bypass' All tuned by AccuTune Off-Road
2" Fox Air Bumps on the front
TK1 Sway bar on the rear
17" Raceline Monsters w/ Al. Beadlocks
43" Super Swamper SX Sticky's 1/2+ tread
2" 6061 Aluminum Links with 1.25" Chro-mo Heims
15 Gal. Custom Al. Fuel Cell w/ -10 Fittings w/ pre-filter and Walbro Pump
Warn 9.5 RC Winch w/ syn. rope
PSC Full Hydro - Double ended Ram
Corbeau Ultra Seat - Vinyl - w/ PRP 5.3 Harness
ARB on board air compressor.
LED Rock Lights
UHMW Skid Plate
Spare Drive Shafts and Parts can be included.
118" WB
Weighs approx. 3k
Ready to Ride, needs nothing, Very light and plenty of power! Will go up anything you have the balls to point it at.
35,500.00 or 45K I'll add a really nice 24' ATC Enclosed trailer.
Looking for a nice, built Jeep on tons/V8, Stock JK, Nice bigger RV, "Might" trade for a RZR turbo S, CAN AM Defender and some $ your way. Whatcha got?
Offer up, the worst I can say is no, but please be realistic. Thanks.
Willing to travel within reason - I have friends out west and would consider delivering for fuel money.
Located in Winston Salem NC
Last edited: