l33 DOD/afm delete cam suggestions

Adam90xj · Aug 6, 2014

I'm into a l33 2007 5.3 243heads with dod/afm. 30k miles. Was pulled due to stuck dod lifter tap. Will need new lifters etc and plan to put at cam in at the same time. What spec cam should I be looking at? I have enough room to run a truck intake or car. Block hugger hooker headers, TH400/3.8atlas 5.13tons 40-42" rubbers. Thanks for the help. My search of "l33" on here landed me 3 results. I know this is dang near identical to lm7 etc but with flattops and all alum.

fl-krawler · Aug 12, 2014

Get rid of the DOD/afm.. Texas Speed has everything you need.. Does your engine have VVT? If so I would go with one of Texas Speed's VVT cams.. I have their VVT-2 cam in my L92 and I am very happy with it.

redneckengineered · Aug 12, 2014

Adam90xj said:
I'm into a l33 2007 5.3 243heads with dod/afm. 30k miles. Was pulled due to stuck dod lifter tap. Will need new lifters etc and plan to put at cam in at the same time. What spec cam should I be looking at? I have enough room to run a truck intake or car. Block hugger hooker headers, TH400/3.8atlas 5.13tons 40-42" rubbers. Thanks for the help. My search of "l33" on here landed me 3 results. I know this is dang near identical to lm7 etc but with flattops and all alum.

Do this and forget it. Extra bonus if you ever step up motors to a 6.0, 6.2 or whatever you can keep everything just swap to the corresponding Mast cam and load the new tune from Mast via laptop
http://www.mastmotorsports.com/view.php?id=273&c=27&s=5