less turning radius with hysteer?

[xtremetoyo]

seems as if i have a less turning radius now that i have hysteer on my truck, is this normal or am i doing something wrong?

1980 toyota 4x4

 

[zukkev]

So many variables as to why...are the arms the same length as the OE arms? Is the drag link adjusted correctly?

 

[xtremetoyo]

So many variables as to why...are the arms the same length as the OE arms? Is the drag link adjusted correctly?

ill do some measuring and checking

 

[CHOP SHOP]

Hysteer and an IFS box will always out steer a stock push pull system.

You should be able to bury it past the stops with all normal hysteers if installed correctly.

Im betting on that you have the pitman arm way off center and the box is not able to steer all the way in one of the directions.

 

[xtremetoyo]

It turns evenly in both directions. And the pitman arm was never removed

 

[CHOP SHOP]

Normal hysteer requires the pitman arm to be replaced.

If your was not removed then then you must have some homemade stuff or sumthin weird?

 

[LiftedZuki]

Some high steer may not designed for zero Ackerman?

 

[xtremetoyo]

Normal hysteer requires the pitman arm to be replaced.

If your was not removed then then you must have some homemade stuff or sumthin weird?

just the stock ifs pitman arm, seemed to line up fine with everything

 

[ain'tstuckjustresting]

Doesn't you're stock pitman have a ball joint on it? How is it attached to the drag link?

Most kits use a FJ-80 TRE on the drag link and a new forged pitman that has a tapered hole in it.