jcorlew24
Well-Known Member
I have decided to see if there is any interest in my Toyota buggy. I made the decision to put it up for sale so I can fund my own build. This is a great buggy and does extremely well. This is a used buggy and the chassis does have some scrapes and dents as expected with the type riding this buggy is capable of.
Here is the run down.
4 linked front and rear
16" FOA coilovers with remote resi's in the front
16" fox 2.0 air shocks in the rear.
TG Rebuildable joints
Where there aren't Trail Gear joints I have New 3/4" QA1 Chromolly Heims
30 spline Longs brand new. (2 rides on them)
HP front 3rd with aussie locker
Marlin drive flanges
Arp steering studs
Longfield 5th stud setup.
High Steer arms. (dont remember brand cause i bought them used)
Full hydro steering with chevy PS pump
1.5 wheel scacers all the way around
22r on propane with a Cam and header. Doesn't smoke, knock, or leak any oil
It has the shorter 4 sp yota tranny from and 82 truck
Built doubler with longfield output, marlin total spline 23 spline input shaft between the cases, and 4.7 gears in the crawl box. Doubler and t-case was rebuilt spring 2010. Longfield output and 4.7 gears were put in spring 2010 as well.
Tripple drilled flanges
4.10 gears in the diffs
welded rear
Poly racing seats with covers
Removeable Steering Wheel
Chevy alternator
39.5 iroks with 8 rides on them mounted on rock-a-thon 32 bolt steel beadlocks.
9000# Chicago electric winch with amsteel blue synthetic cable
3000 lb. Chicago electric rear suck down winch with synthetic cable
Newly installed Trail Gear Trunion Bearing Eliminators
New seals and knuckle re-build kit installed on the front axle
4 point Simpson racing Harnesses on both seats
Diamond plate roof
New Midland CB
Cd Player with homemade wake tower speakers
I am in the middle of installing the Trunnion Bearing Eliminator kit and the knuckle re-build kit. I also installed new brake pads front and rear, as well as new wheel cylinders on the rear, and a new brake master cyclinder. I will try to get some more pictures up as soon as I can. There has also been some more tubing added to the openings on the driver and passenger sides, and down bars at the front windsheild since the pictures were taken. I am asking $7,550 for the rig plus 2 bare Toyota housings, a spare hydrolic line, spare rear axles shafts with drum assembly, and spare front driveshaft. If interested you can call me at 615-456-7185.
www.youtube.com/watch?v=ZFwBKoTwbkk
www.youtube.com/watch?v=8sAtnBb8Kug
Here is the run down.
4 linked front and rear
16" FOA coilovers with remote resi's in the front
16" fox 2.0 air shocks in the rear.
TG Rebuildable joints
Where there aren't Trail Gear joints I have New 3/4" QA1 Chromolly Heims
30 spline Longs brand new. (2 rides on them)
HP front 3rd with aussie locker
Marlin drive flanges
Arp steering studs
Longfield 5th stud setup.
High Steer arms. (dont remember brand cause i bought them used)
Full hydro steering with chevy PS pump
1.5 wheel scacers all the way around
22r on propane with a Cam and header. Doesn't smoke, knock, or leak any oil
It has the shorter 4 sp yota tranny from and 82 truck
Built doubler with longfield output, marlin total spline 23 spline input shaft between the cases, and 4.7 gears in the crawl box. Doubler and t-case was rebuilt spring 2010. Longfield output and 4.7 gears were put in spring 2010 as well.
Tripple drilled flanges
4.10 gears in the diffs
welded rear
Poly racing seats with covers
Removeable Steering Wheel
Chevy alternator
39.5 iroks with 8 rides on them mounted on rock-a-thon 32 bolt steel beadlocks.
9000# Chicago electric winch with amsteel blue synthetic cable
3000 lb. Chicago electric rear suck down winch with synthetic cable
Newly installed Trail Gear Trunion Bearing Eliminators
New seals and knuckle re-build kit installed on the front axle
4 point Simpson racing Harnesses on both seats
Diamond plate roof
New Midland CB
Cd Player with homemade wake tower speakers
I am in the middle of installing the Trunnion Bearing Eliminator kit and the knuckle re-build kit. I also installed new brake pads front and rear, as well as new wheel cylinders on the rear, and a new brake master cyclinder. I will try to get some more pictures up as soon as I can. There has also been some more tubing added to the openings on the driver and passenger sides, and down bars at the front windsheild since the pictures were taken. I am asking $7,550 for the rig plus 2 bare Toyota housings, a spare hydrolic line, spare rear axles shafts with drum assembly, and spare front driveshaft. If interested you can call me at 615-456-7185.
www.youtube.com/watch?v=ZFwBKoTwbkk
www.youtube.com/watch?v=8sAtnBb8Kug
