kidkrawler
New Member
- Joined
- Jun 11, 2013
- Messages
- 1
I have this posted elsewhere, but some of these parts, the front 14 bolt, are better suited to a certain style of wheeling. 
Everything in Utah, just south of Salt Lake City.
- 2012 Trent Fab FJ40 4 seater chassis, motor and trans mounts installed, otherwise a bare frame. New and not messed with, it is still as received from T-Fab. 4000 with an FJ steel hood. If you want to cover truck freight, I can load it. (84003 zipcode with a fork lift)
- Brand new in box Atlas transfer case. 3.8 gears, driver drop, standard rotation, 32 spline input and heavy duty front output. GM vss tailhousing, 1350 flanges, with stick shifters, and TH400 adapter. $2450 SHIPPED in the lower 48.
- 2010 GMC LY6 engine, 6.0l, basically an LS3 with a cast block and truck intake and oil pan. Aluminum heads, complete and uncut harness with ecm and accessories, I chucked the PS pump since I wasn't using it. Has LS7 exhaust manifolds. Looks clean. $1300, I can strap to a pallet for extra, last engine was $250 shipped across the country.
- Recently rebuilt TH400, redline clutches and band, lowered 2.72 Hughes first gear set, 27 spline output shaft, no converter, I wanted a different speed, very low miles, $500, has one bolting ear cracked on it. Plan on $150 to pallet and ship.
- Torq 14 bolt nodular 3rd member, Ruff Stuff Specialties 14 bolt housing 3.5" heavy tubes, drivers drop and uncut. Paid $1780, $1650 shipped.
- Barely used Reid 60 Ford style knuckles - $550 shipped
- Art Carr TH400 Shifter - $175 shipped.
- 16 Ruff Stuff 1.25 heims, lefts and rights, with 3/4 stainless spacers, jam nuts and bungs. Brand new still in Dan's box. Paid $1120, $900 shipped.
- PSC extra large clevis ends, 4 Ruff Stuff 7/8" tie rod ends, tie rod DOM. All brand new, $165 shipped.
I have paypal, I will not cover the 3% buyer fee, I will take a check or cashiers check and wait for funds to clear etc. Contact me for phone number or whatever you need.
Everything in Utah, just south of Salt Lake City.
- 2012 Trent Fab FJ40 4 seater chassis, motor and trans mounts installed, otherwise a bare frame. New and not messed with, it is still as received from T-Fab. 4000 with an FJ steel hood. If you want to cover truck freight, I can load it. (84003 zipcode with a fork lift)
- Brand new in box Atlas transfer case. 3.8 gears, driver drop, standard rotation, 32 spline input and heavy duty front output. GM vss tailhousing, 1350 flanges, with stick shifters, and TH400 adapter. $2450 SHIPPED in the lower 48.
- 2010 GMC LY6 engine, 6.0l, basically an LS3 with a cast block and truck intake and oil pan. Aluminum heads, complete and uncut harness with ecm and accessories, I chucked the PS pump since I wasn't using it. Has LS7 exhaust manifolds. Looks clean. $1300, I can strap to a pallet for extra, last engine was $250 shipped across the country.
- Recently rebuilt TH400, redline clutches and band, lowered 2.72 Hughes first gear set, 27 spline output shaft, no converter, I wanted a different speed, very low miles, $500, has one bolting ear cracked on it. Plan on $150 to pallet and ship.
- Torq 14 bolt nodular 3rd member, Ruff Stuff Specialties 14 bolt housing 3.5" heavy tubes, drivers drop and uncut. Paid $1780, $1650 shipped.
- Barely used Reid 60 Ford style knuckles - $550 shipped
- Art Carr TH400 Shifter - $175 shipped.
- 16 Ruff Stuff 1.25 heims, lefts and rights, with 3/4 stainless spacers, jam nuts and bungs. Brand new still in Dan's box. Paid $1120, $900 shipped.
- PSC extra large clevis ends, 4 Ruff Stuff 7/8" tie rod ends, tie rod DOM. All brand new, $165 shipped.
I have paypal, I will not cover the 3% buyer fee, I will take a check or cashiers check and wait for funds to clear etc. Contact me for phone number or whatever you need.
