tincan
Well-Known Member
Built in 2009 by Skidmarx offroad for Me
Motor 2004 LS1 5.7 F.A.S.T Air intake system 450hp
Custom headers , single chamber flowmaster exhaust
Ron Davis Raditor
TH 400 professinaly built rated for 600hp
trans cooler with eletric fan
205 with lomax kit and lomax case 1350 yokes transfer gear 3.1
Chassi 1.75 .120 wall DOM
Wheel base 120
Four link front and rear. Material 1.75 DOM .5 wall 7/8 heim joints
16 inch Sway away coilovers all the way around
Custom Sway bar on rear
Rockwell steering axle front and rear. Oversion 16 spline alloy shafts
Pinion Brakes, inside of axle, Wilwood Cal., wilwood masters, Mazada rooters
Detroit Locker front and rear
POS double ended rams 8 inch stroke front and rear
Howel steering pump
steering system cooler with eletric fan
PSC Joystick for rear steer
Trail worthy fab. Recentered H1 doublebeed lock with PVC inserts 16.5x9 95% 44x18.5x16x5 TSL
Warn winch 9.5ti with synthetic rope
15 Gallon RCI Fuel Cell
Tool Box
Suspension Seats with 4 point harness
Aluminum skins and skid plate
Sony water proof stereo
CB
Auto meter Gauges , Fuel, oil pressure, volt, tac, temp
Painless push button breaker box, with, 8 switches
Head lights, tail lights, rock lights.
I'm 6'1 240lbs and have plenty of room. Seat adjust for a smaller person. Overall the most comfortable rig I have ever set in.
This buggy needs nothing, We built it right and I have never broken anything on it. Sounds awesome, Scary amount of power. Only selling cause I need to free up some cash for a new house. Thanks for looking. Call me with any questions. I need to sell this asking $ 40,000.00 all reasonable offers will be consider. Located in Knoxville TN David 865-643-3283
Motor 2004 LS1 5.7 F.A.S.T Air intake system 450hp
Custom headers , single chamber flowmaster exhaust
Ron Davis Raditor
TH 400 professinaly built rated for 600hp
trans cooler with eletric fan
205 with lomax kit and lomax case 1350 yokes transfer gear 3.1
Chassi 1.75 .120 wall DOM
Wheel base 120
Four link front and rear. Material 1.75 DOM .5 wall 7/8 heim joints
16 inch Sway away coilovers all the way around
Custom Sway bar on rear
Rockwell steering axle front and rear. Oversion 16 spline alloy shafts
Pinion Brakes, inside of axle, Wilwood Cal., wilwood masters, Mazada rooters
Detroit Locker front and rear
POS double ended rams 8 inch stroke front and rear
Howel steering pump
steering system cooler with eletric fan
PSC Joystick for rear steer
Trail worthy fab. Recentered H1 doublebeed lock with PVC inserts 16.5x9 95% 44x18.5x16x5 TSL
Warn winch 9.5ti with synthetic rope
15 Gallon RCI Fuel Cell
Tool Box
Suspension Seats with 4 point harness
Aluminum skins and skid plate
Sony water proof stereo
CB
Auto meter Gauges , Fuel, oil pressure, volt, tac, temp
Painless push button breaker box, with, 8 switches
Head lights, tail lights, rock lights.
I'm 6'1 240lbs and have plenty of room. Seat adjust for a smaller person. Overall the most comfortable rig I have ever set in.
This buggy needs nothing, We built it right and I have never broken anything on it. Sounds awesome, Scary amount of power. Only selling cause I need to free up some cash for a new house. Thanks for looking. Call me with any questions. I need to sell this asking $ 40,000.00 all reasonable offers will be consider. Located in Knoxville TN David 865-643-3283
