Machining DRW to SRW Dana 60 hubs.

[PORTER]

I have a customer that owns a machine shop that will do a set for me for a pretty reasonable cost. Does anybody have anything negative to say about doing this? I have looked online and there are very few that have said don't do it due to structural reasons, but many more said it will work fine as I have not seen any failures by what I have read. Anybody have any real world experience on this topic? Thanks

 

[benw1]

Did it, ran it for years no problems at all. I'd do it again in a heartbeat.

 

[JAWS]

Did it on a customers jeep.. works just fine.. make sure you get the right size wheel studs...

 

[zuk88]

I have a customer that owns a machine shop that will do a set for me for a pretty reasonable cost. Does anybody have anything negative to say about doing this? I have looked online and there are very few that have said don't do it due to structural reasons, but many more said it will work fine as I have not seen any failures by what I have read. Anybody have any real world experience on this topic? Thanks

Aww that's your plan with my used rotors....$100 then :fawkdancesmiley:
Just kidding, I was going to get hubs and rotors machined to 5x5.5

 

[PORTER]

Thanks guys for the input, your responses are what I expected.

 

[PORTER]

Aww that's your plan with my used rotors....$100 then :fawkdancesmiley:
Just kidding, I was going to get hubs and rotors machined to 5x5.5

.....................

 

[Hampton]

Do you even have any DRW hubs Porter?

 

[PORTER]

Do you even have any DRW hubs Porter?

There being stored in a nice dry shop Duh.:fawkdancesmiley:

 

[zuk88]

I'm using them as paper weights for the time being :redneck:

 

[PORTER]

I'm using them as paper weights for the time being :redneck:

Free storage is awesome.:awesomework:

 

[zuk88]

If I need something neato for my 60 swap or for the zuk keep me in mind though :redneck:

 

[PORTER]

If I need something neato for my 60 swap or for the zuk keep me in mind though :redneck:

Will do, someday I will return the favor.
:awesomework:

 

[zuk88]

And that's how the 4 wheelers brotherhood works! :beer:

 

[zuk88]

See people, this is how it's supposed to be not a Spanaway mudder rip of situation!

 

[NOISYBOY]

See people, this is how it's supposed to be not a Spanaway mudder rip of situation!

You mad a funny:redneck:

 

[Hairtrigger]

Are these the hubs you got from me?

 

[PORTER]

Are these the hubs you got from me?

Nope, just a set I got on a front 60 I acquired. But did I ever get anything from you? I don't remember dealing with you in the past?? Refresh my memory.