MM - Wheelin 4 Warriors Ride - May 26-29, 2017

Hardline Crawlers - Rock Bouncer Builds, Tech & Off-Road Trail Talk

Help Support Hardline Crawlers:

Ima get me (another) ride up RBD this year if it kills me. But not with Casey...cause that might ACTUALLY kill me! :cougar:
 
When we went it was dry. You could almost take a stockish jeep up it without flipping over and spilling your crackers, almost..
31182cf999d8dae448da709ec6dc358d.jpg



Sent from my iPhone using Tapatalk
 
Eddyj said:
When we went it was dry. You could almost take a stockish jeep up it without flipping over and spilling your crackers, almost..
31182cf999d8dae448da709ec6dc358d.jpg



Sent from my iPhone using Tapatalk

You and MoneypitYJ...cold. Ice cold.
 
creepycrawly said:
You and MoneypitYJ...cold. Ice cold.



HAHAHA, spilled crackers!!!!!!!!!!!!!!!!. It was like a CSI crime scene that led us right to the culprit. :rolf:




ADMINISTRATOR
 
The buggy is home and ready. Murrah Motorsports got it all hooked up to keep the gas inside the tank. A few feet of air under the tires on primos at the end of the day should be a good test! :woot:
 
Re: Re: MM - Wheelin 4 Warriors Ride - May 26-29, 2017

creepycrawly said:
Anybody heading in to ride on Friday?
Looks like I'll be the Friday morning sometime.

Sent from my Pixel using Tapatalk
 
1tonyj said:
Several from Florida been in Thursday night....Rest of us by noon on Friday

Y'all just swing on through Milton and haul my junk up there too! Ha! See y'all out there.
 
Re: Re: MM - Wheelin 4 Warriors Ride - May 26-29, 2017

trucker said:
Looks like I'll be the Friday morning sometime.

Sent from my Pixel using Tapatalk

You sure about that? :stir:
 
Re: Re: Re: MM - Wheelin 4 Warriors Ride - May 26-29, 2017

BLGXJ said:
You sure about that? :stir:
I'm never sure about anything anymore

Sent from my Pixel using Tapatalk
 
FlatlandFSJ said:
Anyone coming to this have a stock inner shaft for the short side of a full width chevy dana 44?


Anyone? We're rolling out today sometime and I still haven't found one.
 
Im waiting on my new tires to show up possibly on Friday so if they do I won't be there till late but I hope to make it! Cant wait to try out these new 37" sticky Treps and RCVs! :JRich:
 
Planning to try and make it out Saturday to hopefully catch up with a lot of old wheeling buddies I haven't seen in a long time. Unfortunately my new YJ I'm building isn't gonna be ready but still planning to have a great time.


Sent from my iPhone using Tapatalk
 
Do Work 93YJ said:
Planning to try and make it out Saturday to hopefully catch up with a lot of old wheeling buddies I haven't seen in a long time. Unfortunately my new YJ I'm building isn't gonna be ready but still planning to have a great time.


Sent from my iPhone using Tapatalk



Where u been hiding?
 
Behind two kids. LOL Their finally old enough to come with me and showing interest so I decided to build another rig. So in true fashion I picked up another YJ.


Sent from my iPhone using Tapatalk
 
Good turn out, got to show up and buy some parts, shake some hands and meet some people, back in the truck and back home.
 
This is my first post here so I'll do an informal introduction here and do another later.

This weekend my wife bought my anniversary present at the W4W auction.

I had other plans on what I wanted to build and this level never entered my mind. I have one bad ass wife who never ceases to amaze me.

I am very experianced in most all aspects of the drive train since I've built a couple drag cars years ago and have been a professional mechanic for over 3 decades. What I don't know is the suspension and other aspects for the rock crawlers that sets them apart from street cars. Now the research and learning begins.

2d0828e69e23249898beaefd39a4d1c4.jpg


A very huge thanks to Jduck for an awesome build on this frame and the rest of the crew at Morris Mountain for making this event a massive success.

Semper Fi
Chris
 
Congratulations on the upcoming build.

Alternator issues sidelined the XJ at lunch on Saturday. Still had a blast watching everyone else beat on their rigs.

A BIG thank you to all who made this possible. My family & I cant wait until next year.
 
SemperFiArms said:
This is my first post here so I'll do an informal introduction here and do another later.

This weekend my wife bought my anniversary present at the W4W auction.

I had other plans on what I wanted to build and this level never entered my mind. I have one bad ass wife who never ceases to amaze me.

I am very experianced in most all aspects of the drive train since I've built a couple drag cars years ago and have been a professional mechanic for over 3 decades. What I don't know is the suspension and other aspects for the rock crawlers that sets them apart from street cars. Now the research and learning begins.

2d0828e69e23249898beaefd39a4d1c4.jpg


A very huge thanks to Jduck for an awesome build on this frame and the rest of the crew at Morris Mountain for making this event a massive success.

Semper Fi
Chris

Congrats, it sounds like the chassis is going to a good home.
 
Congratulations Chris. Let the fun begin and the bank account go south!!

This year we had a friggin' awesome turnout, I would have liked to put some faces to some names on here. For anyone that might wonder who I am, I was the Old Guy wearing the Safety Green "Staff" shirt Saturday. We will post money numbers up very soon after Jamie "Son of s Jeep" and I finish totaling things up. It's going to be good though.

Attendance Numbers were as Follows:
Friday Sign Ins:
Spectator/Passenger - 42
Driver - 91

Saturday:
Spectator/Passenger - 60
Driver - 101

Total: - 294

Thanks to everyone in attendance and for your continued support, this was the 10th anniversary and probably the biggest. Looking forward to next year already. :woot: :woot: :woot:
 
SemperFiArms said:
This is my first post here so I'll do an informal introduction here and do another later.

This weekend my wife bought my anniversary present at the W4W auction.

I had other plans on what I wanted to build and this level never entered my mind. I have one bad ass wife who never ceases to amaze me.

I am very experianced in most all aspects of the drive train since I've built a couple drag cars years ago and have been a professional mechanic for over 3 decades. What I don't know is the suspension and other aspects for the rock crawlers that sets them apart from street cars. Now the research and learning begins.


A very huge thanks to Jduck for an awesome build on this frame and the rest of the crew at Morris Mountain for making this event a massive success.

Semper Fi
Chris

Welcome to Hardline

Congrats on the new purchase! :dblthumb:

There is a ton of suspension tech. on here if you can wade through all the pointless threads. Just do a little searching.
 
Back
Top