These control arm brackets are something we've had in the works for quite some time.
Now here they are materialized!!!
Available to order directly off our website....www.KORE4x4Customs.com
Lower Control Arm Mounts for the frame side - $25.95
- Mounting width is 2 5/8". Perfect for most aftermarket suspension joints.
- CNC cut from 1/4" plate & formed on a press brake for precise fitment.
- Integrated lower gusset makes for an very strong bracket.
- Brackets are fully welded in a jig to keep distortion down to a minimum.
- Available for left & right sides
Universal Upper Control Arm Brackets - $14.95
- These are cut from 3/16" plate & formed on a press brake
- Mounting width is 2 5/8" wide
- Bolt Hole Size is 9/16" and can be drilled to desired size
- Designed to be used on top of a truss or attached to the frame for upper control arm mounts
Axle End Upper Control Arm Bracket - $24.95
- Cut from 3/16" plate & formed on a press brake
- Mounting width is 2 5/8" wide
- Bolt Hole Size is 9/16" and can be drilled to desired size
- Designed to fit on any 3" radius axle, but can be easily enlarged for bigger diameter axle tubes.
- Optional gussets are available
Now here they are materialized!!!
Available to order directly off our website....www.KORE4x4Customs.com
Lower Control Arm Mounts for the frame side - $25.95
- Mounting width is 2 5/8". Perfect for most aftermarket suspension joints.
- CNC cut from 1/4" plate & formed on a press brake for precise fitment.
- Integrated lower gusset makes for an very strong bracket.
- Brackets are fully welded in a jig to keep distortion down to a minimum.
- Available for left & right sides
Universal Upper Control Arm Brackets - $14.95
- These are cut from 3/16" plate & formed on a press brake
- Mounting width is 2 5/8" wide
- Bolt Hole Size is 9/16" and can be drilled to desired size
- Designed to be used on top of a truss or attached to the frame for upper control arm mounts
Axle End Upper Control Arm Bracket - $24.95
- Cut from 3/16" plate & formed on a press brake
- Mounting width is 2 5/8" wide
- Bolt Hole Size is 9/16" and can be drilled to desired size
- Designed to fit on any 3" radius axle, but can be easily enlarged for bigger diameter axle tubes.
- Optional gussets are available