Sold/Expired New Knuckle and C-shape!!! Will fit 47 Spline Shafts!!!!!

RocksolidPerformance · Oct 1, 2013

New Knuckle and C-shape With Unit Bearing And Drive Flange!!!!!!! Will fit 47 Spline RCV or Ouverson Shafts!!!!!! These things are huge and strong. The ball joints are larger than 60 ball joints. Uses a bolt on drive flange with 8x6.5 Bolt Pattern. Everything is brand new!!! Base price with no high steer and no brakes is $2,000 Call for more info. 616-696-8114

TBItoy · Oct 1, 2013

Re: Re: New Knuckle and C-shape!!! Will fit 47 Spline Shafts!!!!!

Are the wheel adapter/drive flange pieces available separately?

RocksolidPerformance · Oct 2, 2013

Sure I could sell them separate. They are custom and bolt to a custom wheel bearing though.

TBItoy · Oct 2, 2013

RocksolidPerformance said:
Sure I could sell them separate. They are custom and bolt to a custom wheel bearing though.

Yeah I see how they work, (looks like they bolt to the original 8x170 wheel pattern, plus machine work on the wheel bearing/hub snout area)

Any particular reason y'all built them that way instead of just cutting a drive slug for 47 spline? Did the slug get too thin?

Really cool stuff by the way.

RocksolidPerformance · Oct 14, 2013

The wheel Bearing is originally a 10 lug unit bearing. These are not Dana 60 C shapes and knuckles these are much larger. The bearing starts out with a solid center and is bored out for axle to go through. I will post some comparison pictures next to 60 stuff.

TBItoy · Oct 14, 2013

Re: Re: Re: New Knuckle and C-shape!!! Will fit 47 Spline Shafts!!!!!

RocksolidPerformance said:
The wheel Bearing is originally a 10 lug unit bearing. These are not Dana 60 C shapes and knuckles these are much larger. The bearing starts out with a solid center and is bored out for axle to go through. I will post some comparison pictures next to 60 stuff.

Ah ok, cool.

I should have noticed that the C didn't have the coil spring mount pad on it.