One Ton YJ- Coilover problem

[kmcminn]

With what you are going to pay someone to check that stuff. You can probably come out the same money buying tools and doing it yourself. Its very easy. I think a nitrogen gauge with a bleeder is like 60 dollars on ebay.

 

[Gadametz]

With what you are going to pay someone to check that stuff. You can probably come out the same money buying tools and doing it yourself. Its very easy. I think a nitrogen gauge with a bleeder is like 60 dollars on ebay.

Ill hit a welding supply store and see what I can pick one up for

 

[kmcminn]

Ill hit a welding supply store and see what I can pick one up for

I think the gauge i got was like 60 dollars.

 

[TRD]

Where are the dual rate nuts set?
What springs are in the rear?

 

[Gadametz]

150/250 in the rear i believe. The dual rates are set all the way extended where the cap is at the top to be fully extended

 

[Gadametz]

Also when I recharge them what psi will be best?

 

[mac5005]

200 psi

 

[TRD]

150/250 in the rear i believe. The dual rates are set all the way extended where the cap is at the top to be fully extended

Can you post a picture?

 

[rpf500]

You ever figure out the problem?

 

[Gadametz]

Update I found the problem: PO just way over charged the driver front coilover instead of getting bump stops to prevent the axle from hitting the panhard on the axle. Thanks for the help