rockcombat
Member
- Joined
- Nov 1, 2011
- Messages
- 13
I am selling or parting out a custom rockcrawler. It has served me well over the years, and I have traveled all over America. It has never left me on the trail. I will sell the whole thing or part it out if necessary. It is not complete, as I started an engine swap and have not finished fabrication of the dash and gauges. Everything else has been repainted, remounted, and is ready to run. The chassie is a Jeep frame, cut down front and rear, extended with tubes, 1-3/4" DOM tube fenders, rockers, bumpers, roll bar. I would like to get as close to $25K as I can for this rig. If not, I'll have to get what I can in this tough economy. For the chassie alone, after everything else sells, I'll take $2500. That includes all tube work, skid plates, 4-link mounts. Thanks for looking guys. I also have many other 4x4 parts and tools for sale. Jason 7705462270 or [email protected] - West GA Area
Engine - $3200: LQ9 from an '06 Escalade - approximately 25K; custom paint; ceramic headers; wiring harness reworked by Jim's Performance Offroad; Advanced Adapters flex plate; offroad converter; computer reflash; no security; no emissions; one-wire hookup; approximately 400HP / 370lb torque
Tires - $2600 (SOLD): 39" reds on Allied Rockathon beadlocks in black; 90% tread or better; almost broke in
Transmission - $900: Monster turbo 350 built by Jason at Extreme Transmissions; full comp reverse pattern; red clutch disk; premium hardened parts; cut case with JRS bell housing; custom paint - Picture Coming Soon
Transfer Case - $2290 (SOLD): '06 Atlas 4-speed with cable shifter; 1350 flange outputs; spare output flanges; spare input flanges; 2.72, 4.3, 10.34; custom paint
Winch - $600: WARN 9.5xp; synthetic rope line; aluminum ferrule
Winch - $800: WARN 9.0RC; synthetic rope line; aluminum ferrule
Seats - $500: 2 ea Mastercraft suspension seats; black/gray with 4-point Mastercraft harnesses
Shocks - $1800 (SOLD): 4 ea Fox 2.5 16" coilover shocks with dual springs; custom paint; 200/400
Axles (set) - $9990.00: Front - Rockcrusher/Solid HP Dana 60; 64" WMS; 35-spline chromo; Rockcrusher forged knuckles 6-bolt design; Timken bearings; Poly Performance drive flanges; X-lock spindle bolts; Detroit locker; 8-lug; PSE double ended ram; forged arms; custom skid plate; double triangulated 4-link brackets; custom paint
Rear - Rockcrusher/Solid HP Dana 60; 62" WMS; 35-spline chromo; Timken bearings; disk brakes; Detroit locker; 8-lug; double triangulated 4-link brackets; custom paint
Welder - $490; Premier power welder with 280amp alternator
Suspension Links/Rod Ends $350.00- 16 ea Poly Performance Johnny joints; links made up of 1/2" wall DOM tubing
Engine - $3200: LQ9 from an '06 Escalade - approximately 25K; custom paint; ceramic headers; wiring harness reworked by Jim's Performance Offroad; Advanced Adapters flex plate; offroad converter; computer reflash; no security; no emissions; one-wire hookup; approximately 400HP / 370lb torque
Tires - $2600 (SOLD): 39" reds on Allied Rockathon beadlocks in black; 90% tread or better; almost broke in
Transmission - $900: Monster turbo 350 built by Jason at Extreme Transmissions; full comp reverse pattern; red clutch disk; premium hardened parts; cut case with JRS bell housing; custom paint - Picture Coming Soon
Transfer Case - $2290 (SOLD): '06 Atlas 4-speed with cable shifter; 1350 flange outputs; spare output flanges; spare input flanges; 2.72, 4.3, 10.34; custom paint
Winch - $600: WARN 9.5xp; synthetic rope line; aluminum ferrule
Winch - $800: WARN 9.0RC; synthetic rope line; aluminum ferrule
Seats - $500: 2 ea Mastercraft suspension seats; black/gray with 4-point Mastercraft harnesses
Shocks - $1800 (SOLD): 4 ea Fox 2.5 16" coilover shocks with dual springs; custom paint; 200/400
Axles (set) - $9990.00: Front - Rockcrusher/Solid HP Dana 60; 64" WMS; 35-spline chromo; Rockcrusher forged knuckles 6-bolt design; Timken bearings; Poly Performance drive flanges; X-lock spindle bolts; Detroit locker; 8-lug; PSE double ended ram; forged arms; custom skid plate; double triangulated 4-link brackets; custom paint
Rear - Rockcrusher/Solid HP Dana 60; 62" WMS; 35-spline chromo; Timken bearings; disk brakes; Detroit locker; 8-lug; double triangulated 4-link brackets; custom paint
Welder - $490; Premier power welder with 280amp alternator
Suspension Links/Rod Ends $350.00- 16 ea Poly Performance Johnny joints; links made up of 1/2" wall DOM tubing
