Post random pic Thread

tonybolton · Feb 23, 2014

Re: Re: Post random pic Thread

Still got me back to the trailer....

fordcontraption01 · Feb 23, 2014

tonybolton said:
Still got me back to the trailer....

that looks like one of mine :****:

Bronco Buster · Feb 23, 2014

5BrothersFabrication said:
I always wondered if a feller ran into some money, would it be very profitable. Owners of several trucks seem to make out pretty good. It seems like there's a magic number though. If you own 1, 2, 3, or 30+ it's more trouble than its worth. Guys with a handful of trucks do pretty good.

With dump trucks it is hit and miss depends on location and if there are a lot of guys not working. A lot of it is who you know that can keep you busy. If you know a big contractor in your area talk to him if you don't know one get in touch with one and find out if he could keep a few more trucks busy. If you do buy some get at least 3. 2 will pay for three but 1 will not pay for 2 so if 1 breaks down for an extended time or you are without a driver you have the payments covered.

sastoy · Feb 23, 2014

Re: Re: Post random pic Thread

AdamF said:
Where is hellfire fabworks? I had big plan a few years ago to a shop and was going to name it hellfire. It never happened because I'm a lazy sack of crap most of the time :drinkers:

In Cali. He makes fj80 knuckles

TacomaJD · Feb 23, 2014

Re: Re: Re: Re: Post random pic Thread

sastoy said:
In Cali. He makes fj80 knuckles

Couldn't remember if it was Cali, Texas, Arizona or where, I just knew it was out west somewhere lol. Billy Weiss is a good dude helped me out a lot on my front fj80 rebuild. Answered a lot of my questions and also sent me some spare parts CHEAP. But yeah, they make FJ80 junk, knuckles, hi steer, etc.

See signature for link to his website. Or if you are on Tapatalk like me currently, I think it is www.hellfire-fabworks.com

johneddie · Feb 23, 2014

Truth!! flashemifyougotem :****:

TheViking · Feb 23, 2014

molaugh :gtfo:

johneddie · Feb 23, 2014

:driving:

mna0121 · Feb 24, 2014

fordcontraption01 said:
Bad piece right here :****:

You got that right. He was at SGMP for the Lights Out race this weekend. If anyone is intrested in watching "street" cars on drag radials run low 4's check the links out over on dragcowerage.com. Race was rained out yesterday finals may even still be on live feed. I watched five hours of it after work Thursday night.

lowbudgetjunk · Feb 24, 2014

One step closer to being back on the trails in an actual rig

FM5332FF · Feb 25, 2014

Another day at work.

TN12Valve · Feb 25, 2014

^^^ Where the hell do you work? :o

FM5332FF · Feb 25, 2014

My part time job is with Nascar Track Safety at Sebring International Raceway. We are getting ready for The 12 Hours Of Sebring.

TN12Valve · Feb 25, 2014

Well, lucky you! I'm still drooling over that Porsche! :****:

TacomaJD · Feb 25, 2014

TN12Valve said:
Well, lucky you! I'm still drooling over that Porsche! :****:

Me too, digging the old fighter plane graphics Usually don't see that sort of stuff on a Porsche. drool

FM5332FF · Feb 25, 2014

5BrothersFabrication · Feb 25, 2014

I hate you. :driving:

TacomaJD · Feb 26, 2014

Re: Re: Post random pic Thread

Tried wheeling the forklift this evening at work....think we need to groove the tars.

What could I need a Youth XS Busted Knuckle shirt for? .....stay tuned.

DirtMonkey · Feb 26, 2014

Re: Re: Post random pic Thread

TacomaJD said:
What could I need a Youth XS Busted Knuckle shirt for? .....stay tuned.

Hopefully you know a petite chick with flashemifyougotem and you're going to post pics of that WET shirt here :woot:
Am I close?

xjcrawler · Feb 26, 2014

Re: Re: Post random pic Thread

DirtMonkey said:
Hopefully you know a petite chick with flashemifyougotem and you're going to post pics of that WET shirt here :woot:
Am I close?

Ditto that, cause from what I've learned about you on Hardline I sure hope you haven't reproduced!!!!!!!!!!!!

al1tonyota · Feb 26, 2014

Re: Re: Post random pic Thread

xjcrawler said:
Ditto that, cause from what I've learned about you on Hardline I sure hope you haven't reproduced!!!!!!!!!!!!

molaugh molaugh molaugh :****:

kushKrawlin · Feb 26, 2014

Haha. Sheesh this update sure is takin a long time... ??? Hey JD you do know that you have to take the Hand cuffs off to get the shirt on them right?? laughing1

grcthird · Feb 26, 2014

Re: Re: Post random pic Thread

xjcrawler said:
Ditto that, cause from what I've learned about you on Hardline I sure hope you haven't reproduced!!!!!!!!!!!!

molaugh molaugh molaugh

muddinmetal · Feb 26, 2014

kushKrawlin said:
Haha. Sheesh this update sure is takin a long time... ??? Hey JD you do know that you have to take the Hand cuffs off to get the shirt on them right?? laughing1

molaugh molaugh molaugh

grcthird · Feb 26, 2014

We're waiting!

Hurry up and get sis in that shirt! :flipoff1:

Rokcrler · Feb 26, 2014

Re: Re: Post random pic Thread

So is it ok to use this for labeling my harness since I'm not professional and this isn't industrial? :****:

TacomaJD · Feb 26, 2014

grcthird said:
We're waiting!

Hurry up and get sis in that shirt! :flipoff1:

Jeezus balls, I was wondering how long it would take before a sister joke surfaced molaugh molaugh molaugh

Should have an update tomorrow evening some time. Might even make a thread out of it. :dblthumb: Gonna be cool ****! :woot:

Rokcrler · Feb 27, 2014

Re: Re: Post random pic Thread

Just because this one makes me chuckle

TacomaJD · Feb 28, 2014

Re: Re: Re: Re: Post random pic Thread

Rokcrler said:
Just because this one makes me chuckle

Lol That's how I feel every day at work.

Rokcrler · Feb 28, 2014

Re:

Haha...so do I. They asked me yesterday..."why do you always look mad/upset, you should have fun..." I answered with.. "cause I work with a bunch of f'n idiots that's why.." :flipoff1: