Post random pic Thread

Hardline Crawlers - Rock Bouncer Builds, Tech & Off-Road Trail Talk

Help Support Hardline Crawlers:

kushKrawlin said:
Awesome looking rig ! Ive been watching you make improvements over the last few years . This thing has came a long way ! :woot: :woot:
 
kturner said:
Awesome looking rig ! Ive been watching you make improvements over the last few years . This thing has came a long way ! :woot: :woot:

I'm going to suggest staying away from the 700r4. They don't take heat very well at all. My buddy Jeremy has one in his blazer and they don't live long. Granted it's behind a 550hp 421 small block, but it's built to supposedly take the power. They are a finicky piece of **** transmission.
 
JDlife

c13146a3e7ac0fc5b88aff271d6f1a17.jpg
 
This is in my backyard. The parent is on the limb and the "child" in below on the ground.
 

Attachments

  • IMG_20160717_164858.jpg
    IMG_20160717_164858.jpg
    707.4 KB
onepieceatatime said:
You buying? I'm researching put a 205 behind my 700r4 or putting a 400 in it with a 205

Sent from my SM-G930T using Tapatalk
I will bring the beer and help. Ha


Sent from my iPhone using Tapatalk
 
Re: Re: Post random pic Thread

nhl_bullitt said:
Bought a set of axles, and instead of tying up the expensive wheel dollies I built some out of wood. Haha. They indeed work.


I do this same thing except use furniture dollies from HF. Can even sit a jack stand on them to get it at the correct height.
 
e19736c33aa0205e2d9a6a311049f060.jpg


Seen this gem on a rzr cage Kevin (smurfy) has. I've seen some terrible fab. That there rzr is hands down the worst.
I don't remember who Kevin said originally done it, but thank God they have stopped.

Dark horse maybe?

Sent from my Nexus 6 using Tapatalk
 
Re: Re: Post random pic Thread

twizt3dfuc said:
e19736c33aa0205e2d9a6a311049f060.jpg


Seen this gem on a rzr cage Kevin (smurfy) has. I've seen some terrible fab. That there rzr is hands down the worst.
I don't remember who Kevin said originally done it, but thank God they have stopped.

Dark horse maybe?

Sent from my Nexus 6 using Tapatalk
I'm obviously not a fabricator, but I'm not sure what the bad fab is. Is it that what appears to be a scrap piece of metal was cut used for a tab of some sort? I don't get it, I are dumb.
 
TacomaJD said:

Meant to post up some of the fine craft brews I've been drinking while in Ft. Collins CO and I've had quite a few but I've been pretty drunk and trying other legal things here and haven't thought to take any pics. The thin air has made me a cheap date.
 
Re: Re: Post random pic Thread

TacomaJD said:
I'm obviously not a fabricator, but I'm not sure what the bad fab is. Is it that what appears to be a scrap piece of metal was cut used for a tab of some sort? I don't get it, I are dumb.
\
LOOKS TO BE A PIECE OF A FRAMING SQUARE STANLEY PROTO BRAND :****:
 
Re: Re: Post random pic Thread

pholmann said:
I'm going to suggest staying away from the 700r4. They don't take heat very well at all. My buddy Jeremy has one in his blazer and they don't live long. Granted it's behind a 550hp 421 small block, but it's built to supposedly take the power. They are a finicky piece of **** transmission.
I always heard that about them too but I've had this one for 5 years and it hasn't given me any troubles. I have a spare on the shelf that I always figure is gonna end up in there but it just hasn't happened. But I might sell both transmissions while they still work and go to a 400 just to save headache down the road.

Sent from my SM-G930T using Tapatalk
 
Re: Re: Re: Post random pic Thread

TacomaJD said:
I'm obviously not a fabricator, but I'm not sure what the bad fab is. Is it that what appears to be a scrap piece of metal was cut used for a tab of some sort? I don't get it, I are dumb.
No Josh. No dumb. That is the gem I found. The bad fab and poopoo welds and uneven sides is the problem. Maybe Kevin can get some more pics here.
6fccbcd931183eaa209edbb807934c92.jpg

This is all I have, if you zoom you can see it. The way it's sleeved and what not.

Sent from my Nexus 6 using Tapatalk
 
Re: Re: Post random pic Thread

rednecklights said:
695165d8073208bcce634008782a4780.jpg


I really should stay off eBay late at night


Sent from my iPhone using Tapatalk
You're too big for it piper.

Sent from my SM-G935V using Tapatalk
 
MoparMan said:
Holy ****! I wanna ride it :****:

Come on to the town creek dirt track and I'll let yah throw a leg over it.

And for the record I've almost wrecked 2x's at the beach trying to take pictures of damn dodges like your truck. One had tube doors and all kids of cool ****
 
rednecklights said:
695165d8073208bcce634008782a4780.jpg


I really should stay off eBay late at night


Sent from my iPhone using Tapatalk

Motor Specs? I had one a few years back sent the motor to Sand Trax racing in Oklahoma. Came back with 98.6HP which is mild compared to what guys run up around Michigan sand dunes and out west, but power to weight ratio that thing would fly. I had mine on Hoosier street tires all around and would drive it everywhere.
 
rednecklights said:
Come on to the town creek dirt track and I'll let yah throw a leg over it.

And for the record I've almost wrecked 2x's at the beach trying to take pictures of damn dodges like your truck. One had tube doors and all kids of cool ****

Sweet, I might have to take you up on that.

Haha, that's funny.....yeah tube doors is a pretty good idea.
 
rpf500 said:

I pass by one like that all the time just outside of Muscle Shoals, AL. I've actually posted something about it on here before but have never stopped to take a pic. The worst part about the one I see is that the trailer has a tarp over the roof.....but there's 2 vettes sitting in the driveway.
 

Latest posts

Back
Top