Project ol’ school

[5BrothersFabrication]

So you'll have room for suspension seats or have to run Kirkeys?

 

[AllGoNoShow]

I have vintage style kirkeys for it, will have compression foam made for it like the ultra 4 cars with the kirkey seat covers.


Sent from my iPhone using Tapatalk

 

[AllGoNoShow]

Playing with ideas trying to decide on bent tube vs cutler style joints. I have 5ish inches of headroom, going to be tight.

Sent from my iPhone using Tapatalk

 

[5BrothersFabrication]

Since it is an old GM cab, I'd bend tube like this and maybe cut down an HHR grill and stick inside it. Maybe skin a front hinged hood on it too.

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[AllGoNoShow]

Ha we are on same page mike, was just posting this pic.

Sent from my iPhone using Tapatalk

 

[5BrothersFabrication]

Ha we are on same page mike, was just posting this pic.

thumb.gif

 

[AllGoNoShow]

Budget build with coils to ori’s. Lesson for the day is to not finish weld **** till you are sure. Black booger’s for a few days.

Sent from my iPhone using Tapatalk

 

[AllGoNoShow]

Work truck needed work tonight.

Sent from my iPhone using Tapatalk

 

[AllGoNoShow]

Mocking up the front...again.

Sent from my iPhone using Tapatalk

 

[5BrothersFabrication]

I'm usually zoned out in thinking time, daydreaming for 90% of my workdays, I think about this build a lot. Makes me think one of these years I'm gonna build a chassis that looks like a Model A. Gonna be tricky.

 

[87_bigbadzuk]

How high did you bring the frame up in the front and Back? I'm digging it, I have had similar plans in my head for about 2 years.

 

[paradisepwoffrd]

Re: Re: Project ol’ school

I'm usually zoned out in thinking time, daydreaming for 90% of my workdays, I think about this build a lot. Makes me think one of these years I'm gonna build a chassis that looks like a Model A. Gonna be tricky.

Didn't Coleworx & Randy's RockRods both build something with model A body or features?


This one is one of my favorites, but it needs more tube.

 

[CHASMAN9]

If you are talking about "Nasty Bucket", Coleworx did complete it for Trent Lee who eventually sold it and now Clark Marshall in Oklahoma rocks the crap out of it. thumb.gif




ADMINISTRATOR

 

[AllGoNoShow]

I'm usually zoned out in thinking time, daydreaming for 90% of my workdays, I think about this build a lot. Makes me think one of these years I'm gonna build a chassis that looks like a Model A. Gonna be tricky.

Get it at bud. :drinkers:

 

[AllGoNoShow]

How high did you bring the frame up in the front and Back? I'm digging it, I have had similar plans in my head for about 2 years.

I will measure tomorrow if I remember to do it.

 

[5BrothersFabrication]

I meant to say Model T. I've had a bug for a Model A rat rod for so long, it's stuck on the brain. Haha

Want to build the basic shape from toob and form the sheet metal to look like this:

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[AllGoNoShow]

Not slot of progress over the holidays, but I did put the door on to see how it looks.

Sent from my iPhone using Tapatalk

 

[1TONTJ]

Too cool. 8) The cut boggers and the patina on the cab really make it.

 

[AllGoNoShow]

Too cool. 8) The cut boggers and the patina on the cab really make it.

Thanks man, that means a lot coming from you, you build badass stuff.



Sent from my iPhone using Tapatalk

 

[87_bigbadzuk]

Any updates? Its been awhile!

 

[bjo44]

So amazing man good job

 

[bjo44]

Hey man how wide is this chassis

 

[ridered3]

Hey man how wide is this chassis

Unfortunately he's not logged in here since last September.