QUALITY company for 1350 yokes

Boonie Buster · Jul 21, 2008

no excuses said:
Tom woods also makes 1350 ujoints that are hella strong and give you 10degrees more travel then the standered 1350 joints.

doesn't a normal one net 20 degrees, because this company said these were higher angle than most offer stock...:eeek:

Cascade_Crawler · Jul 21, 2008

TW joints also add to the vibration of the driveline. 1310s!

Not Jobless · Jul 21, 2008

Cascade_Crawler said:
1310s!

1310's

all the cool people run 1350's or bigger :awesomework:

Boonie Buster · Jul 21, 2008

Jobless said:
1310's

all the cool people run 1350's or bigger :awesomework:

do you run 1350s?

Not Jobless · Jul 21, 2008

Boonie Buster said:
do you run 1350s?

I've never run anything other than 1310's...

Boonie Buster · Jul 21, 2008

Jobless said:
I've never run anything other than 1310's...

are there any advantages to running one over the other? I am in the midst of maybe seeing if I can get 1310 stuff in return for my shitty 1350 stuff, I don't want to be cool anymore:hi:

Not Jobless · Jul 21, 2008

I started with 1310's...never had any reason to change to something else.

As for the advantages...they work for me that 's all I know.

Boxxerace · Jul 21, 2008

I had the right yokes sent to me the first time from highangledrivelines.com. I had a combo of 1350 and 1410 yokes and shaft that were perfect.

Jesse, the main guy there seemed quite helpful on the phone as well.

Boonie Buster · Jul 21, 2008

Just called to see if i could return all my stuff for 1310 stuff since i was returning half the order anyways....he laughed.....took my number and said he was going to look into it and hung up..... I am skeptical now....:eeek: :booo: :booo: :booo: :booo: :booo:

Wildman1 · Jul 21, 2008

I have 2 1350 yokes for a 35spline shaft. Don't know if that will help any. Got mine from with my STaK's box but went to flanges to run CV joints.

Binder · Jul 21, 2008

Wildman said:
I have 2 1350 yokes for a 35spline shaft.

Sure that's not 32 spline?

Wildman1 · Jul 21, 2008

Binder said:
Sure that's not 32 spline?

Yep, to follow in Karl's footsteps, I stand retarded. They are 32 spline.

Boonie Buster · Jul 21, 2008

Ok, well it looks like they're going to exchange my stuff for the 1310 stuff, but it has me concerned that the guy says that the reamed out holes on the np205 yokes is how they come....:eeek: But anyways, I am downgrading to 1310s, cheaper, more common.... and thinking about it more, it brings the "fail point" (in my eyes) back to the drivelines and not the ring &pinion/differential/etc.