rpf500
Well-Known Member
LOOKING FOR SOME TRAIL SPARES IF ANYONE HAS THEM PM OR TEXT ME PLEASE.
812-480-4395
812-480-4395
Sold/Expired REAR FORD DANA 60 SHAFTS
- Thread starter rpf500
- Start date
Help Support Hardline Crawlers:
rpf500
Well-Known Member
ANYONE?
WENT TO 2 U-PULLS TODAY AND NOTHING.
SOMEONE HAS TO HAVE THESE LAYING AROUND.
WENT TO 2 U-PULLS TODAY AND NOTHING.
SOMEONE HAS TO HAVE THESE LAYING AROUND.
BIG_BLAZER86
Well-Known Member
- Joined
- Jun 26, 2010
- Messages
- 245
- Reaction score
- 0
What length are they ?
rpf500
Well-Known Member
35" And 30 Spline.
After Going To Junk Yards Yesterday, I Figured Out They Definitely Arent From The Late 80 To Early 90 Fords. You Guys May Know That Already, But I Didnt. Those Models Have Bigger Shafts And An O-ring Seal Where They Bolt To Hub.
Other Measurements I Have:
Passenger Side Flange To Top Diff Cover Center Bolt 28 1/8 (Bolt Is Offset, Not Truly Center)
Driver Flange To Same Diff Bolt 28 1/2
Both Flanges To Diff Ends (Where Tubes Slide Into Center Section) Is 19 1/2
Thanks For Any Input Or help
After Going To Junk Yards Yesterday, I Figured Out They Definitely Arent From The Late 80 To Early 90 Fords. You Guys May Know That Already, But I Didnt. Those Models Have Bigger Shafts And An O-ring Seal Where They Bolt To Hub.
Other Measurements I Have:
Passenger Side Flange To Top Diff Cover Center Bolt 28 1/8 (Bolt Is Offset, Not Truly Center)
Driver Flange To Same Diff Bolt 28 1/2
Both Flanges To Diff Ends (Where Tubes Slide Into Center Section) Is 19 1/2
Thanks For Any Input Or help
