bdillon2372
Well-Known Member
[size=10pt]POSTING THIS FOR A FRIEND[/size], THIS CHASSIS WAS BUILT BACK IN 2013 BY JAY ROBERTS/ BACKYARD FABRICATION, JAY BUILT THE ORIGINAL FORD BUGGY FOR ME, I WATCHED THIS ONE GO TOGETHER - IT IS BUILT RIGHT TO TAKE SERIOUS ABUSE.
SODDY DAISY TN. 37379
[size=10pt]CONTACT ROBERT LEWIS 423-902-7000[/size]
[size=10pt]ROCK BOUNCER STARTER KIT[/size]
[size=10pt][size=10pt]$13,000 OBO[/size][/size]
*Chassis sold as a roller
*Chassis with 2 kirkey seats, motor and tranny mounts (set up for SBC and turbo 350)
*Links with 1 1/4 Heims all around
*Fox coilovers (No springs)
*Custom SBC headers
*Brand new propane system
*Rock crusher diff covers
*Trussed Chevy Dana 60 with Reid knuckles, disk brakes and high steer
*14 bolt with disk brakes, truss and pinion guard
*(5) 44x18.50x15 Aetna cut TSL's on Trail Ready beadlocks
*(2) Chevy np205 transfer cases - one stock one twin sticked
*(1) turbo 350 transmission
PRETTY MUCH ALL THIS BUGGY LACKS TO BE READY TO
BOUNCE IS MOTOR, RADIATOR, FLOOR BOARDS, DASH, DRIVE SHAFTS, PLUMBING AND WIRING, AND SPRINGS FOR THE SHOCKS.
[size=10pt]CONTACT ROBERT LEWIS 423-902-7000[/size]
SODDY DAISY TN. 37379
[size=10pt]CONTACT ROBERT LEWIS 423-902-7000[/size]
[size=10pt]ROCK BOUNCER STARTER KIT[/size]
[size=10pt][size=10pt]$13,000 OBO[/size][/size]
*Chassis sold as a roller
*Chassis with 2 kirkey seats, motor and tranny mounts (set up for SBC and turbo 350)
*Links with 1 1/4 Heims all around
*Fox coilovers (No springs)
*Custom SBC headers
*Brand new propane system
*Rock crusher diff covers
*Trussed Chevy Dana 60 with Reid knuckles, disk brakes and high steer
*14 bolt with disk brakes, truss and pinion guard
*(5) 44x18.50x15 Aetna cut TSL's on Trail Ready beadlocks
*(2) Chevy np205 transfer cases - one stock one twin sticked
*(1) turbo 350 transmission
PRETTY MUCH ALL THIS BUGGY LACKS TO BE READY TO
BOUNCE IS MOTOR, RADIATOR, FLOOR BOARDS, DASH, DRIVE SHAFTS, PLUMBING AND WIRING, AND SPRINGS FOR THE SHOCKS.[size=10pt]CONTACT ROBERT LEWIS 423-902-7000[/size]
