Terryjmatthew
Well-Known Member
for your 4Runner/Taco/Mini truck. Must be DD'able. I don't drive far, but I need something that I can drive on the interstate every once in a blue moon. I drove mine to MMORV last month, wheeled it and drive back home. I am looking for something similar, just not as heavy or thirsty.
Not looking to get hosed or trade down unless you want to throw in some cash. I am willing to keep or swap some parts to get it where it needs to be. (Tires/wheels/radio/front locker/etc)
I feel like mine is worth $5500-6000 ish.
94 FZJ80 232000 miles.
Frankies (3.5-4") lift with new Monroe reflex shocks in the rear, IPOR skid, ARB high pinion front locker(or 4.10 open third), Full float rear axle with Aussie locker, CDL, 4.10 gears, SOR tuff duck seat covers in the front, leather interior, third row, Alpine head unit, 315/75R16 Yokohama Geolander Mt's with 2000 miles(have been wheeled though), Rear sway bar dropped, front sway bar removed, Slee caster plates. Have a set of 4xinnovations sliders (uninstalled) that I might throw in. I also have lots of spare parts that can or can not be included. Three SF rear housings, one front housing with third member, a couple spare rear diffs, driveshafts.
I have replaced the plugs, wires, cap rotor, valve cover gasket, serviced the trans, knuckle job, new pads and rotors on the front, both o2 sensors, etc, etc, etc.
* edit*
Runs like a top after fixing an o2 sensor wiring problem.
On to the pics...
Not looking to get hosed or trade down unless you want to throw in some cash. I am willing to keep or swap some parts to get it where it needs to be. (Tires/wheels/radio/front locker/etc)
I feel like mine is worth $5500-6000 ish.
94 FZJ80 232000 miles.
Frankies (3.5-4") lift with new Monroe reflex shocks in the rear, IPOR skid, ARB high pinion front locker(or 4.10 open third), Full float rear axle with Aussie locker, CDL, 4.10 gears, SOR tuff duck seat covers in the front, leather interior, third row, Alpine head unit, 315/75R16 Yokohama Geolander Mt's with 2000 miles(have been wheeled though), Rear sway bar dropped, front sway bar removed, Slee caster plates. Have a set of 4xinnovations sliders (uninstalled) that I might throw in. I also have lots of spare parts that can or can not be included. Three SF rear housings, one front housing with third member, a couple spare rear diffs, driveshafts.
I have replaced the plugs, wires, cap rotor, valve cover gasket, serviced the trans, knuckle job, new pads and rotors on the front, both o2 sensors, etc, etc, etc.
* edit*
Runs like a top after fixing an o2 sensor wiring problem.
On to the pics...
