rock mafia
Well-Known Member
- Joined
- Jan 31, 2008
- Messages
- 569
SOLD
Listing this for a friend who is a little internet challanged. I did the tube work on it several years ago, he did the rest.
Build here:
http://www.pirate4x4.com/forum/showthread.php?t=547859
Not quite as pretty anymore.
Copied from his FS thread on NC4x4.
Listing this for a friend who is a little internet challanged. I did the tube work on it several years ago, he did the rest.
Build here:
http://www.pirate4x4.com/forum/showthread.php?t=547859
Not quite as pretty anymore.
Copied from his FS thread on NC4x4.
SAMUARI BUGGY (KIND OF) $14,000
tube work done at jims garage
powder coated black
vortec 4.3 w/ new injectors
th 350 freshly rebuilt less than 10 miles on it
dual toyota transfer cases 23 spline input, rear case is 4.7 with cromoly output
front dana 60 4.56 new cromoly 35 spline shafts and drive flanges,lockrite,great lake off road diff cover,full hydro steering w/double ended ram,high steer arms
rear dana 70 4.56 welded,great lake off road diff cover,disc brakes
42'' swamper tsls 1 brand new never run 2 new only 2 runs on them and 1 about 80% tread
H1 double bead locks w/custom rock rings and stazworks inserts
4 link front and rear,lowers .380 wall,uppers .250 wall w/re joints
16'' fox air shox
rear sway bar w/steel arms
fully plumed in steel beaided lines,ps cooler,tranny cooler and oil cooler
wilwood peddal assambly and master cylinders
ron davis alum radiator
brand new yellow top optma
warn 8000 front winch and small habour freight rear winch
new guages
simson 4 pt harness
any intrest or questions feel free to call me @ 336-689-1161
thanx Geoff