Shotgun fab built chassis (Todd Puckett) originally built for Mike Karwath.
Very similar in design to Todd and Jason Spegals current rides. All .188 and .250 wall.
*Motor shown does not go with sale
117" Wheelbase
22" belly
47" inside at shoulders
66" to tallest point
Dana 60 front
- Solid inner & outer knuckles
- 35 spline chomoly inner & outer shafts with Yukon joints
- Welded carrier
- Solid high steer kit
- Artec front truss with ram mount
- ECG drive flanges
- 1350 Yoke
- 4:10 gears
14 bolt rear
- All new bearings and seals
- New disc brake conversion
- 1350 Yoke
- 4:10 gears
- Open carrier
Johnny Joints on all the links.
- 4 link F&R set up by Jason Spegal
FOA shocks
- 16" front
- 14" rear
- Spegal revalved similar to his current setup, which works awesome if you watch any of the youtube videos
32 bolt DIY beadlocks
44 TSL in good shape
Turbo 350 - supposed to be fresh
205 t-case
- Twin cable shifters
- Northwest Fab clocking ring
Brass 4 core radiator
Extra parts to go with sale
14 bolt rear, welded, 4.10's
Turbo 350 - fresh
203 t-case
Stock 350 small block
Propane kit on small block
- 425 mixer
- 2 tanks
- complete kit from jasper engines
Aluminum radiator
Orbital valve
- 2.5CI ????
-2 turns lock to lock
And anything else he has for it.
Posting for a friend.
Give Jon Ferguson a call for more information. Located in Independence, KY
859-609-6123
$12,500 obo
Very similar in design to Todd and Jason Spegals current rides. All .188 and .250 wall.
*Motor shown does not go with sale
117" Wheelbase
22" belly
47" inside at shoulders
66" to tallest point
Dana 60 front
- Solid inner & outer knuckles
- 35 spline chomoly inner & outer shafts with Yukon joints
- Welded carrier
- Solid high steer kit
- Artec front truss with ram mount
- ECG drive flanges
- 1350 Yoke
- 4:10 gears
14 bolt rear
- All new bearings and seals
- New disc brake conversion
- 1350 Yoke
- 4:10 gears
- Open carrier
Johnny Joints on all the links.
- 4 link F&R set up by Jason Spegal
FOA shocks
- 16" front
- 14" rear
- Spegal revalved similar to his current setup, which works awesome if you watch any of the youtube videos
32 bolt DIY beadlocks
44 TSL in good shape
Turbo 350 - supposed to be fresh
205 t-case
- Twin cable shifters
- Northwest Fab clocking ring
Brass 4 core radiator
Extra parts to go with sale
14 bolt rear, welded, 4.10's
Turbo 350 - fresh
203 t-case
Stock 350 small block
Propane kit on small block
- 425 mixer
- 2 tanks
- complete kit from jasper engines
Aluminum radiator
Orbital valve
- 2.5CI ????
-2 turns lock to lock
And anything else he has for it.
Posting for a friend.
Give Jon Ferguson a call for more information. Located in Independence, KY
859-609-6123
$12,500 obo
