• Help Support Hardline Crawlers :

SOLD 2018 Lightweight Buggy Honda V6 , Dana 44, RCV’s

zayne2427

There's only one way to find out
Joined
Nov 20, 2009
Messages
2,432
Location
Cullman, Al
Sold Original for sale ad with tons of pics
I traded for this buggy with the intentions of keeping it. I already have 2 other buggies and a bunch of other stuff I am about to list that I don't use much so decided to go ahead and let someone else enjoy this one.

Chassis was built in 2018 . 1.75x.120 hrew I'm about 6'2" 220 and its pretty comfy. Weighs around 2900 without anyone in it. Seat is on a slider so my 8 year old can also drive it.
20" belly, 113" wheelbase, overall height is around 74"

2001 Honda 3.0 v6 new timing belt kit and water pump on it. cant remember the mileage....around 180xxx I think, runs like a Honda should!

Tim beatle harness and computer

transmission (Honda) is fresh built and the carrier/spiders are welded to send power to the transfer case from one output.

Nissan Datsun divorced case (low miles) with spare case

1310 yoke flanges

1310 balanced drive shafts, 2" dom

Full PSC kit brand new (tim beatle power steering bracket) tc pump

PRP seats with mud drain, PRP harnesses

ARB air compressor with tire inflation kit

d44 axles from a waggoneer built about as good as you can get.
-front has a ARB, 4.88 gear, RCV 300m axles DOM tie rod with 3/4 heims
-rear has a Detroit, 4.88, Dutchman axles, sleeved with some thick DOM tube

Currie Anti rock sway bar on the rear

7/8" ruffstuff heims, 2"x.25 DOM lower bars, 1.75" uppers

Ruffstuff 3/8" thick link tabs

New Fox shocks, front has 14x2.0, rear is 16x2.0

limit straps on all 4 corners

M/T Champion beadlocks 15x10 with 38.5 tsls hold air great, one leaks down over about 4 days

ar400 skid plate (1/4")

1/2" hdpe boat side skids

Led lights

panels are .060 and .080 aluminum

Jazz 12 gallon fuel cell, walbro 255 pump, Russel filter, mostly -an6 fittings

Kicker wakeboard speakers, Bluetooth pyle amp

Torque b.t. obd2 scanner to give you the gauge readouts to your smart device

Room on the back for a cooler and tool box

$15,500 or best offer. Will consider partial trades
Cullman al
2563472508
 

Attachments

  • 6124C54C-B6EF-45FC-8D0E-898DB636B7FD.jpeg
    6124C54C-B6EF-45FC-8D0E-898DB636B7FD.jpeg
    2 MB · Views: 468
  • F6D86AF1-DF90-4602-A985-3F3A3649CEC6.jpeg
    F6D86AF1-DF90-4602-A985-3F3A3649CEC6.jpeg
    91.5 KB · Views: 407
  • 561A1006-D1CF-4F8C-8383-577572BBAEC2.jpeg
    561A1006-D1CF-4F8C-8383-577572BBAEC2.jpeg
    136.1 KB · Views: 383
  • F16D7BA7-A3C9-47D7-B5B7-B15CFA564774.jpeg
    F16D7BA7-A3C9-47D7-B5B7-B15CFA564774.jpeg
    79.6 KB · Views: 383
  • 4AD97C6A-2D09-445F-A5D7-F01EF41ED113.jpeg
    4AD97C6A-2D09-445F-A5D7-F01EF41ED113.jpeg
    112.1 KB · Views: 428
Last edited:
About 15 in low range. Probably 35 in high. I'll gps it and see what it it
 
Last edited:

Latest posts

Top