redneckengineered
Trailer Park Panty Dropper
SOLD
1992 Wrangler clean title
97 LT1, th350, 4.3 atlas 32 spline outputs, eor rear output mount. All drivetrain mounts have poly bushings.
Ford high pinion front, 4.10 gears, Detroit, rcv axles, drive flanges, crane cover, btf high steer arms. Yukon forged pinion yoke. 1350 joints, long travel driveshaft. Stainless brake lines, Reid Knuckles.
60 rear, 14 bolt outers, 35 spline Dana 70 shafts with studs and nuts, BTF cover, 4.10s, spool, Yukon forged pinion yoke. 1350 joints. Stainless brake lines.
Be cool radiator with a billet catch can, flex a lite black magic fan w/thermostat, derale trans cooler with fan. B&M Pro Grip shifter. Lokar locking dipstick. Lube Locker transpan gasket. Hughes 2500 rpm stall converter.
PSC hydraulic assist with cooler. Drives 60 down road with one hand and does great on the trail.
MagnaFlow stainless muffler
Fox 2.0 remote reservoir coilovers front and rear. Custom valved. Fox 2.0 bumps custom stroked. QA1 springs.
Racelines and 39" reds 80%+ tread.
3 link front done by Mo Figueroa
4 link rear done by EOR
All joints on the suspension heims are 1.25. Panhard bar is 7/8. Rear links are aluminum front are DOM.
RCI double welded cell with Artec Mount.
PRP seats and harnesses. Third seat is a Mastercraft and will hold a full size adult or could be removed for a tool/cooler rack.
Red top optima with BTF mount, k&n filter and prefilter, remote oil filters
Warn 9500HS winch, synthetic rope also doubles as a suck down winch and wireless remote.
20" curved led light bar on front ~ 6" led light bar on rear.
BTF fenders, rockers, and quarter panels with rub bars underneath. Really nice cage with 2 aluminum inserts also.
Aluminum dash. Autometer gauges except water temp. Cigarette lighter socket on a switch, Genright whole hood louver. Jeeps runs great, looks great and performs great.
Wet Sounds Stealth 10 soundbar
More information:
Most people (especially Hardline guys) know this Jeep as kmcminn's old ride. He has poured a lot of time, sweat, and money into this ride and it shows. The parts list essentially rounds out to a well built buggy in a Jeep body. Peter Basler owned the Jeep for a short time and he took great care of it as well. I acquired the Jeep a couple months ago as part of a business deal. The Jeep is currently sitting in my climate controlled shop waiting on a new owner to wheel it like it deserves to be wheeled. I have enough toys to say grace over as is. First thing I did since owning the Jeep was to drop it off with Huffman Fab to have it gone over. They fixed a tranny leak and did a general nut and bolt check to make sure it is ready to ride and it is. New owner could essentially pick it up and go riding. Jeep needs nothing.
Located at my shop in North GA.
1992 Wrangler clean title
97 LT1, th350, 4.3 atlas 32 spline outputs, eor rear output mount. All drivetrain mounts have poly bushings.
Ford high pinion front, 4.10 gears, Detroit, rcv axles, drive flanges, crane cover, btf high steer arms. Yukon forged pinion yoke. 1350 joints, long travel driveshaft. Stainless brake lines, Reid Knuckles.
60 rear, 14 bolt outers, 35 spline Dana 70 shafts with studs and nuts, BTF cover, 4.10s, spool, Yukon forged pinion yoke. 1350 joints. Stainless brake lines.
Be cool radiator with a billet catch can, flex a lite black magic fan w/thermostat, derale trans cooler with fan. B&M Pro Grip shifter. Lokar locking dipstick. Lube Locker transpan gasket. Hughes 2500 rpm stall converter.
PSC hydraulic assist with cooler. Drives 60 down road with one hand and does great on the trail.
MagnaFlow stainless muffler
Fox 2.0 remote reservoir coilovers front and rear. Custom valved. Fox 2.0 bumps custom stroked. QA1 springs.
Racelines and 39" reds 80%+ tread.
3 link front done by Mo Figueroa
4 link rear done by EOR
All joints on the suspension heims are 1.25. Panhard bar is 7/8. Rear links are aluminum front are DOM.
RCI double welded cell with Artec Mount.
PRP seats and harnesses. Third seat is a Mastercraft and will hold a full size adult or could be removed for a tool/cooler rack.
Red top optima with BTF mount, k&n filter and prefilter, remote oil filters
Warn 9500HS winch, synthetic rope also doubles as a suck down winch and wireless remote.
20" curved led light bar on front ~ 6" led light bar on rear.
BTF fenders, rockers, and quarter panels with rub bars underneath. Really nice cage with 2 aluminum inserts also.
Aluminum dash. Autometer gauges except water temp. Cigarette lighter socket on a switch, Genright whole hood louver. Jeeps runs great, looks great and performs great.
Wet Sounds Stealth 10 soundbar
More information:
Most people (especially Hardline guys) know this Jeep as kmcminn's old ride. He has poured a lot of time, sweat, and money into this ride and it shows. The parts list essentially rounds out to a well built buggy in a Jeep body. Peter Basler owned the Jeep for a short time and he took great care of it as well. I acquired the Jeep a couple months ago as part of a business deal. The Jeep is currently sitting in my climate controlled shop waiting on a new owner to wheel it like it deserves to be wheeled. I have enough toys to say grace over as is. First thing I did since owning the Jeep was to drop it off with Huffman Fab to have it gone over. They fixed a tranny leak and did a general nut and bolt check to make sure it is ready to ride and it is. New owner could essentially pick it up and go riding. Jeep needs nothing.
Located at my shop in North GA.
