CartoTracks
Jake White
This is a Ford High Pinion Dana 60 that has been swapped to passenger side drop.
It is just a bare housing, no outer knuckles, brakes, gears, shafts, spindles, rotors....just the housing.
Kingpin axle.
Axle tubes were sleeved and rosette welded.
Extremely strong housing.
From center of kingpin to center of kingpin approximately 54".
Don't have WMS to WMS without having the outers.
Should be the same width as a '79 Ford.
Uses stock length shafts.
Also included with this is a Ruffstuff 1 Ton steering kit
4 Ruffstuff steering inserts
2 Whynotcustoms Histeer arms
Located in Madison, AL
256-714-2000
Pictures in the Craigslist ad here: http://huntsville.craigslist.org/pts/4766523992.html
It is just a bare housing, no outer knuckles, brakes, gears, shafts, spindles, rotors....just the housing.
Kingpin axle.
Axle tubes were sleeved and rosette welded.
Extremely strong housing.
From center of kingpin to center of kingpin approximately 54".
Don't have WMS to WMS without having the outers.
Should be the same width as a '79 Ford.
Uses stock length shafts.
Also included with this is a Ruffstuff 1 Ton steering kit
4 Ruffstuff steering inserts
2 Whynotcustoms Histeer arms
Located in Madison, AL
256-714-2000
Pictures in the Craigslist ad here: http://huntsville.craigslist.org/pts/4766523992.html