crawler1
Well-Known Member
Listing For a buddy .
Great Tube Buggy starter rig . Done me great for the past few years moving on to bigger things .
Front - dodge 60- 5.13 gears welded New ball joints new axle joints
Rear - 14 Bolt 5.13s welded Disc brake setup new pads .
4 linked rear 1 3/4 .250 wall dom. Ballistic jonny joints , only 4 rides on them .
Trailing are front with pan hard bar .
Front coil springs with shocks
Rear 16 in fox air shocks 4 rides since rebuild
Engine 5.2L with a 46RH overdrive trans . 231 trans case with slip yoke eliminator newly rebuilt with B&M trans cooler and fans
10k winch on front
Wheel base is 108 ''
Buggy frame of buggy is made up of 2 1/4'' . 250 square tubing . cage and all surrounding tube work is 2'' .120 wall
cage width inside is 50''
belly clearance 25''
total height 79''
39.5 irocks on 15 '' wheels with DIY beadlocks about 80% tread
Has single cylinder hydro steer with cooler and fans
Located in Southern Ill . $ 10,000.00 OBO ..
Great Tube Buggy starter rig . Done me great for the past few years moving on to bigger things .
Front - dodge 60- 5.13 gears welded New ball joints new axle joints
Rear - 14 Bolt 5.13s welded Disc brake setup new pads .
4 linked rear 1 3/4 .250 wall dom. Ballistic jonny joints , only 4 rides on them .
Trailing are front with pan hard bar .
Front coil springs with shocks
Rear 16 in fox air shocks 4 rides since rebuild
Engine 5.2L with a 46RH overdrive trans . 231 trans case with slip yoke eliminator newly rebuilt with B&M trans cooler and fans
10k winch on front
Wheel base is 108 ''
Buggy frame of buggy is made up of 2 1/4'' . 250 square tubing . cage and all surrounding tube work is 2'' .120 wall
cage width inside is 50''
belly clearance 25''
total height 79''
39.5 irocks on 15 '' wheels with DIY beadlocks about 80% tread
Has single cylinder hydro steer with cooler and fans
Located in Southern Ill . $ 10,000.00 OBO ..