revinkevin
Active Member
- Joined
- Apr 17, 2010
- Messages
- 39
I am parting out my buggy project. Below is the list of parts I have. Most all parts are listed as new. New meaning, all parts have been used for mock up only.
OK due to just to much clutter in my post to put sold on every thing. I am deleting every that is sold. So if its listed I still have it. Thanks!
Would like to see all steering components sold as a whole. As they where bought & matched to go together $1000 for all Line 7-8
2 ) Eagle Machine Hydraulic ram (new)
$350
3 ) Orbital steering valve / pump / remote resivor (all of these are new) $375 / $185 / $150
5) 16 QA1 1 1/4 JAM NUTS ONLY 8 left & 8 right $70
REDUCED 6 ) 2 ( front and rear ) Universal Anti-Rock Kit -Sway bars w/aluminum arms ( like to see these go with the chassis as its set up for them)( these are new) REDUCED $750
REDUCED 7 ) Sanderson Ceramic Coated Headers ( these are new) REDUCED $375
8) Buggy Chassis with the 4 link set up, link bars . Chassis is Built out of 1 3/4 - 120 wall DOM. Main frame rails are 2x3 box tubing. Lower links are 1 3/4 - 3/4 wall taped for the QA1 1- 1/4 hiems. Upper links are 1 3/4 120 wall DOM with bungs welded in. Wheel base is 112. Chassis Set up for small block motor mounts & th 350 trans & atlas mounts. Chassis is still unfinished. Has most of the welding done. Still needs dash & floor , etc. REDUCED $3000
New pics available upon request for the parts you want. I just need an E-Mail addy. Cash or money order for all parts. I really dont feel like shipping any thing, but its not out of the question. If so you will pay for shipping. Thanks for looking. I am located in Murfreesboro TN Call 615-417-4403
OK due to just to much clutter in my post to put sold on every thing. I am deleting every that is sold. So if its listed I still have it. Thanks!
Would like to see all steering components sold as a whole. As they where bought & matched to go together $1000 for all Line 7-8
2 ) Eagle Machine Hydraulic ram (new)
$350
3 ) Orbital steering valve / pump / remote resivor (all of these are new) $375 / $185 / $150
5) 16 QA1 1 1/4 JAM NUTS ONLY 8 left & 8 right $70
REDUCED 6 ) 2 ( front and rear ) Universal Anti-Rock Kit -Sway bars w/aluminum arms ( like to see these go with the chassis as its set up for them)( these are new) REDUCED $750
REDUCED 7 ) Sanderson Ceramic Coated Headers ( these are new) REDUCED $375
8) Buggy Chassis with the 4 link set up, link bars . Chassis is Built out of 1 3/4 - 120 wall DOM. Main frame rails are 2x3 box tubing. Lower links are 1 3/4 - 3/4 wall taped for the QA1 1- 1/4 hiems. Upper links are 1 3/4 120 wall DOM with bungs welded in. Wheel base is 112. Chassis Set up for small block motor mounts & th 350 trans & atlas mounts. Chassis is still unfinished. Has most of the welding done. Still needs dash & floor , etc. REDUCED $3000
New pics available upon request for the parts you want. I just need an E-Mail addy. Cash or money order for all parts. I really dont feel like shipping any thing, but its not out of the question. If so you will pay for shipping. Thanks for looking. I am located in Murfreesboro TN Call 615-417-4403
, i shoulda gottem when i got the radiator i guess laughing1
![IMG_3241[1].JPG](http://attachments.www.hardlinecrawlers.com/xfmg/thumbnail/4/4786-578114e97bd4fbd814077f86e1a55a85.jpg?1625928481)
