As some may notice this is a Goatbuilt chassis which for me brought piece of mind that I knew links, etc. were right. Geometry and planning in these buggies is SUPER important. I know lots of people build this buggies and just place links and do not do the proper calculations. This being said this one is correct.
LIST OF COMPONENTS:
Goatbuilt 4 Seat Chassis made out of 1.75" DOM USA Tubing
Powdercoated White with Misc. Black acc.
Removable roof panels for shade/rain covering
NEW 43" Super Swamper TSL SXs on Trailworthy Fab recentered H1 double beadlocks with gussets powdercoated
Corbeau Baja SS Seats Black with 40" Bench in rear
LED Light Bar, Backup Lights, LED Rock Lights, LED Headlights (not pictured)
Quick disconnect Steering Wheel
New Marine Kenwood Stereo, Carling Switch Panel
Dual Electric Fans on Griffin Offroad Radiator 4 Core Aluminum
Aluminum floor pans, firewall
Cigarette Lighter, USB Charger
Autometer Carbon FIber Gauges
Radiator and Power Steering have Catch Cans
Aliminum 19 gal. Gas tank with rollover vent
Walbro dual pickups in tank for fuel starvation
Walbro Fuel pump 190 LPF with Corvette Regulator/filter hid behind rear seat
9k # Winch - Rugged Ridge
Optima Blue Battery
G-Force Black Harness 5 Point, rear seat has lap belts
2 Fire Extinguishers with quick detach fixtures
Limit Straps
Axles-
Front- Chevy Dana 60 with new calipers, rotors, pads
Chromoly Yukon 4340 Shafts with Super Joints 35 Spline
Yukon Hardcore 35 Spline Drive Flanges
Yukon Grizzly Locker
PSC Full Hydro Steering with Aluminum steer links
Artec Industries High Steer Arms
Solid Industries Axle Covers
5:13 Gears
Rear- Chevy 14 Bolt with disc brakes, new calipers, rotors, pads
Solid Axle Cover
5:13 Gears on Full Spool
Yukon Chromoly cut to fit shafts
PAC Springs, Fox 2" Coilovers 16" Rear, 14" Front
Fox Bump-stops Front/Rear
Engine-
LQ4 Rotating Assembly - Low MIle
243 Heads hand ported with Brian Tooley dual Springs, titanium seats/caps/keepers
3/8" Push Rods, Trunion Bearing Upgrade to stock rockers, Headers
BBK SSI Intake
Fast 36# Injectors in Holley Fuel Rails
PSI WIring Harness for engine w/ DBW Pedal
polished valve covers, MSD Wires w/ relocated coils
2.5" Stainless exhaust with stainless dual flowmaster super 40 series
Big Comp Cam - 235/243 on 113 LSA
ARP Fasteners and Rod Bolts
+/- 450 HP
Driveline-
BUILT Turbo 400 with 34 Element Spreg
TCI Full Reverse manual valve body w/ Engine Braking
3000 TCI Stall with anti ballooning ring
Red Alto Clutches with added forward clutch pack, kolene steels
New Bushings, seals, Lube Locker
Through a NP205
32 Spine In and Out shaft
rear has drive flange, front is 1350 yoke
All driveshafts with front carrier bearing are by Curtis Tatton 1350 Joints/straps
Im sure there is 100 things I am forgetting, this buggy was WELL thought out. Race ready or for serious enthusiast.
$37,000.00
Jeremy Huston 317-468-8065
Located in Indianapolis, IN
LIST OF COMPONENTS:
Goatbuilt 4 Seat Chassis made out of 1.75" DOM USA Tubing
Powdercoated White with Misc. Black acc.
Removable roof panels for shade/rain covering
NEW 43" Super Swamper TSL SXs on Trailworthy Fab recentered H1 double beadlocks with gussets powdercoated
Corbeau Baja SS Seats Black with 40" Bench in rear
LED Light Bar, Backup Lights, LED Rock Lights, LED Headlights (not pictured)
Quick disconnect Steering Wheel
New Marine Kenwood Stereo, Carling Switch Panel
Dual Electric Fans on Griffin Offroad Radiator 4 Core Aluminum
Aluminum floor pans, firewall
Cigarette Lighter, USB Charger
Autometer Carbon FIber Gauges
Radiator and Power Steering have Catch Cans
Aliminum 19 gal. Gas tank with rollover vent
Walbro dual pickups in tank for fuel starvation
Walbro Fuel pump 190 LPF with Corvette Regulator/filter hid behind rear seat
9k # Winch - Rugged Ridge
Optima Blue Battery
G-Force Black Harness 5 Point, rear seat has lap belts
2 Fire Extinguishers with quick detach fixtures
Limit Straps
Axles-
Front- Chevy Dana 60 with new calipers, rotors, pads
Chromoly Yukon 4340 Shafts with Super Joints 35 Spline
Yukon Hardcore 35 Spline Drive Flanges
Yukon Grizzly Locker
PSC Full Hydro Steering with Aluminum steer links
Artec Industries High Steer Arms
Solid Industries Axle Covers
5:13 Gears
Rear- Chevy 14 Bolt with disc brakes, new calipers, rotors, pads
Solid Axle Cover
5:13 Gears on Full Spool
Yukon Chromoly cut to fit shafts
PAC Springs, Fox 2" Coilovers 16" Rear, 14" Front
Fox Bump-stops Front/Rear
Engine-
LQ4 Rotating Assembly - Low MIle
243 Heads hand ported with Brian Tooley dual Springs, titanium seats/caps/keepers
3/8" Push Rods, Trunion Bearing Upgrade to stock rockers, Headers
BBK SSI Intake
Fast 36# Injectors in Holley Fuel Rails
PSI WIring Harness for engine w/ DBW Pedal
polished valve covers, MSD Wires w/ relocated coils
2.5" Stainless exhaust with stainless dual flowmaster super 40 series
Big Comp Cam - 235/243 on 113 LSA
ARP Fasteners and Rod Bolts
+/- 450 HP
Driveline-
BUILT Turbo 400 with 34 Element Spreg
TCI Full Reverse manual valve body w/ Engine Braking
3000 TCI Stall with anti ballooning ring
Red Alto Clutches with added forward clutch pack, kolene steels
New Bushings, seals, Lube Locker
Through a NP205
32 Spine In and Out shaft
rear has drive flange, front is 1350 yoke
All driveshafts with front carrier bearing are by Curtis Tatton 1350 Joints/straps
Im sure there is 100 things I am forgetting, this buggy was WELL thought out. Race ready or for serious enthusiast.
$37,000.00
Jeremy Huston 317-468-8065
Located in Indianapolis, IN