will do a partial trade on the package for a streetable 4x4 truck. Partial to Toyota's but open to others.
Decided to change directions so putting the chassis up for sale. 1.75 tubing I was going to run an LS1 / th400 / 205 so there is room for about any running gear you want to run. 55" inside the chassis. Wheelbase could go from 105 - 120 depending on what you want to do with it. Looking for $2000 for the chassis.
also have (4) fox coilovers (2) 16" and (2) 14" remote resivior. the two 16" coilovers were used for mock-up and have a few scratches from being moved but have not been run and the 14" coilovers have been on 4-5 rides. both come with springs and spring kits all you need is some tabs and bolts and they are ready to go. $1400
dana 60/14 front and rear have been trussed. Rear is set up for 4 link / shaved / pinion guard / discs and has 5.13 gears open
front has been trussed as well and has coilover mounts and has lower 4 link mounts / also has crane knuckles and high steer arms that are keyed / 35 spline chromolly outers / and drive flanges. The front will need a new ring and pinion. $1700
link material : i have enough DOM tho do your upper and lower links. 2" .250 wall on the lowers and 1.75" .250 wall for the uppers. uppers have 3/4 heims already and i have 4 1" heims for the lowers so all you would need is 4 left hand for the lowers and be good to go. $600
or a package deal for $5700 obo
pictures of the rest of the parts are in the post
Patrick. 205-337-8037
[attachment deleted by admin]
Decided to change directions so putting the chassis up for sale. 1.75 tubing I was going to run an LS1 / th400 / 205 so there is room for about any running gear you want to run. 55" inside the chassis. Wheelbase could go from 105 - 120 depending on what you want to do with it. Looking for $2000 for the chassis.
also have (4) fox coilovers (2) 16" and (2) 14" remote resivior. the two 16" coilovers were used for mock-up and have a few scratches from being moved but have not been run and the 14" coilovers have been on 4-5 rides. both come with springs and spring kits all you need is some tabs and bolts and they are ready to go. $1400
dana 60/14 front and rear have been trussed. Rear is set up for 4 link / shaved / pinion guard / discs and has 5.13 gears open
front has been trussed as well and has coilover mounts and has lower 4 link mounts / also has crane knuckles and high steer arms that are keyed / 35 spline chromolly outers / and drive flanges. The front will need a new ring and pinion. $1700
link material : i have enough DOM tho do your upper and lower links. 2" .250 wall on the lowers and 1.75" .250 wall for the uppers. uppers have 3/4 heims already and i have 4 1" heims for the lowers so all you would need is 4 left hand for the lowers and be good to go. $600
or a package deal for $5700 obo
pictures of the rest of the parts are in the post
Patrick. 205-337-8037
[attachment deleted by admin]
s for 4-link.
